| 全预混式灶具污染物排放的实验研究 |
| |
| 引用本文： | 李华,张雪梅,邓凯,王聪聪,钟英杰.全预混式灶具污染物排放的实验研究[J].煤气与热力,2007,27(5):36-39. |
| |
| 作者姓名： | 李华 张雪梅 邓凯 王聪聪 钟英杰 |
| |
| 作者单位： | 浙江工业大学,机电学院,能源与动力工程研究所,浙江,杭州,310014 |
| |
| 摘 要： | 用多孔介质制作火盖,结合3种型式的引射器,提出了全预混式灶具设计方案,对其相应的燃烧污染物排放量进行了实验研究.采用一种新的污染物测试方法,即在灶具火焰附近直接测量污染物的排放量.通过分析各方案燃烧污染物排放量的特点,提出全预混式灶具在降低NOx排放的同时,还应控制其他污染物排放量的设计原则.
|
| 关 键 词： | 污染物排放 全预混式燃烧 灶具 多孔介质 引射器 预混式 灶具 燃烧污染物 物排放 实验 研究 Range Premixed Pollutant Emission Study 原则 设计方案 控制 分析 直接测量 火焰 测试方法 排放量 引射器 种型 |
| 文章编号： | 1000-4416（2007）05-0036-04 |
| 修稿时间： | 2006-06-282006-09-26 |
Experimental Study on Pollutant Emission from Fully Premixed Range |
| |
| LI Hua,ZHANG Xue-mei,DENG Kai,WANG Cong-cong,ZHONG Ying-jie.Experimental Study on Pollutant Emission from Fully Premixed Range[J].Gas & Heat,2007,27(5):36-39. |
| |
| Authors: | LI Hua ZHANG Xue-mei DENG Kai WANG Cong-cong ZHONG Ying-jie |
| |
| Affiliation: | College of Mechanical Engineering, Zhejiang University of Technology, Hangzhou 310014, China |
| |
| Abstract: | A set of design schemes for fully premixed range are put forward using porous medium for manufacturing burner head and combining three types of injectors. The experimental study on the pollutant emission from the corresponding combustion is carried out. The pollutant emission is directly measured using a new pollutant testing method, i.e. directly testing near the flame of range. Through analyzing the characteristics of pollutant emission from the combustion for these design schemes, the design principle that the emission of other pollutants should be controlled when NOx emission is reduced from fully premixed range is presented. |
| |
| Keywords: | pollutant emission fully premixed combustion range porous medium injector |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
