| 风洞筒体预制板拼接节点力学性能试验研究 |
| |
| 引用本文： | 操礼林,李爱群,潘志宏,焦常科,秦道益,金来建.风洞筒体预制板拼接节点力学性能试验研究[J].建筑结构学报,2012,33(8):92-100. |
| |
| 作者姓名： | 操礼林 李爱群 潘志宏 焦常科 秦道益 金来建 |
| |
| 作者单位： | 1.东南大学 混凝土与预应力混凝土结构教育部重点实验室， 江苏南京 210096；;
2.江苏大学 土木工程系， 江苏镇江 212013； 3.江苏科技大学 土木工程与建筑学院， 江苏镇江 212003；4.中国航空规划建设发展有限公司， 北京 100120 |
| |
| 基金项目： | 国家杰出青年基金资助项目，国家“十一五”科技支撑项目 |
| |
| 摘 要： | 为满足大型风洞筒体预制板横向、纵向拼接处力学性能要求,提出了预制板横向、纵向拼接节点两种新型构造措施。对新型横向、纵向拼接节点各9个试件进行受弯、受剪和轴向拉压等试验研究,量测并分析试件的荷载、位移及应变,观测试件的裂缝发展情况和破坏过程。对新型横向拼接节点的受弯、受剪、受拉承载力以及纵向拼接节点的受剪承载力进行了理论简化分析计算,计算结果与试验结果吻合较好。研究结果表明:该新型横向、纵向拼接节点连接可靠,具有良好的承载能力和变形能力。
|
| 关 键 词： | 承载力 大型预制板 静力试验 拼接节点 破坏形态 |
Experimental study on static behavior of two new type of prefabricated slab butt joints |
| |
| CAO Lilin,LI Aiqun,PAN Zhihong,JIAO Changke,QIN Daoyi,JIN Laijian.Experimental study on static behavior of two new type of prefabricated slab butt joints[J].Journal of Building Structures,2012,33(8):92-100. |
| |
| Authors: | CAO Lilin LI Aiqun PAN Zhihong JIAO Changke QIN Daoyi JIN Laijian |
| |
| Affiliation: | 1.Key Laboratory of Concrete and Prestressed Concrete Structure of China Ministry of Education, Southeast University,Nanjing 210096, China; 2.Department of Civil Engineering, Jiangsu University, Zhenjiang 212013, China;3.School of Civil Engineering & Architecture, Jiangsu University of Science and Technology, Zhenjiang 212003, China;4.China Aviation Planning and Construction Development Co., Ltd, Beijing 100120, China |
| |
| Abstract: | To satisfy the mechanical properties of the prefabricated slabs at the location of transverse and longitudinal butt joints of a large-scale wind tunnel tube,two new types of construction schemes of butt joint were put forward in this paper.Nine specimens with the new transverse and longitudinal butt joints proposed in this paper were tested respectively.Behavior of the tested specimens,including load carrying capacity,deflection,strain,and crack width,the failure process and mode etc.,were measured and analyzed.The bending capacity,shearing load and axial tensing capacity of slabs with the transverse butt joint and the shearing load of slabs with the longitudinal butt joint were calculated and verified by the test results.From the test results,it can be concluded that the two kinds of new butt joints of large-scale prefabricated slabs can work very well and have good load carrying capacity and ductility. |
| |
| Keywords: | large-scale prefabricated slab butt joint static test failure mode bearing capability |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《建筑结构学报》浏览原始摘要信息 |
|
点击此处可从《建筑结构学报》下载全文 |
|
