单回路紫铜_水脉动热管传热性能的实验研究

实验研究了单回路紫铜—水脉动热管在水冷方式和定传热功率时,冷却水流量、倾角、管径和充液率4种因素对热管传热性能,包括管壁测点温度、冷热段均温、传热温差、传热热阻和温度振幅的影响规律,得到提高传热性能的一些措施。结果显示:水平放置的单回路脉动热管无法启动;30°以上倾角管内可产生振荡,增加倾角可降低传热热阻;定加热功率下,冷却水流量存在最佳值,过大和过小都会增加传热热阻;在脉动热管允许管径范围内,增加管径可大大降低传热热阻;相同传热功率时,30%充液率热管的传热热阻明显低于70%充液率管;小而均匀的壁温振荡比大幅锯齿状振荡时的传热性能好。

Experimental Study of the Heat Transfer Performance of a Single-loop Copper-water Pulsation Heat Pipe

Experimentally studied was the law governing the influence of four factors,namely,cooling water flow rate,inclination angle,tube diameter and liquid filling rate,on the heat transfer performance of a single-loop copper-water pulsation heat pipe,including its tube wall temperature at measuring points,mean temperature in the cold and hot section,heat transfer temperature difference,heat transfer resistance and temperature fluctuation.As a result,some measures for enhancing the heat transfer performance were o...