高热剂中Al-Fe_3O_4对实心热剂切割弹切割性能影响的研究 |
| |
引用本文: | 刘榆华,辛文彤,孙立明,崔秀梅.高热剂中Al-Fe_3O_4对实心热剂切割弹切割性能影响的研究[J].火工品,2016(6):36-39. |
| |
作者姓名: | 刘榆华 辛文彤 孙立明 崔秀梅 |
| |
作者单位: | 军械工程学院车辆与电气工程系机械设计教研室,河北石家庄,050003 |
| |
基金项目: | 总装司令部维修与改革项目 |
| |
摘 要: | 以实心热剂切割弹为切割手段,实验研究了由Al-CuO、Al-Fe_2O_3、Al-Fe_3O_4三元燃烧系混合组成的高热剂中Al-Fe_3O_4对切割性能的影响。结果表明,随着Al-Fe_3O_4含量的增加,喷射时间增长,割孔深度加大。当Al-Fe_3O_4占高热剂质量分数89.1%时,切割200(L)mm×200(W)mm×20(T)mm的Q235钢板的喷射时间在6s以上,割孔深度达16.42mm。
|
关 键 词: | 高热剂 Al-Fe3O4 实心热剂切割弹 切割性能 |
Effect of Al-Fe3O4 in Thermite on Cutting Capability of Solid Cutting Ammunition |
| |
Abstract: | With solid thermite ammunition as cutting means,the effect of Al-Fe3O4 in thermite consisting of Al-CuO,Al-Fe2O3 and Al-Fe3O4 on cutting capability was studied by test.The results indicated that with the increasing content of Al-Fe3O4,the injection time and cutting depth showed gradually increasing trend.When the weight of Al-Fe3O4 is 89.1%,the ejection time was more ttan 6s,and cutting depth increased tol 6.42 mm while cutting the steel with size of 200 (L) mm × 200 (W) mm × 20 (T) mm. |
| |
Keywords: | Thermite Al-Fe3O4 Solid cutting ammunition Cutting capability |
本文献已被 CNKI 万方数据 等数据库收录! |
|