Al/Ni爆炸箔电爆特性及驱动飞片能力研究 |
| |
引用本文: | 王窈,孙秀娟,郭菲,付秋菠.Al/Ni爆炸箔电爆特性及驱动飞片能力研究[J].火工品,2016(3):5-8. |
| |
作者姓名: | 王窈 孙秀娟 郭菲 付秋菠 |
| |
作者单位: | 中国工程物理研究院 化工材料研究所,四川 绵阳,621900 |
| |
摘 要: | 利用传统的MEMs工艺成功制备出Al/Ni复合爆炸箔,在4k V的充电电压下研究其电爆性能。研究表明,相比于传统的铜爆炸箔,复合爆炸箔的能量利用高,可达18%,而且爆发提前,所需能量较小,爆发能量集中。飞片速度研究表明,爆炸箔的厚度和充电电压会影响飞片的最终速度,飞片的速度随爆炸箔的厚度和电压升高而增大。当爆炸箔的厚度为3μm、充电电压为5k V时,飞片的速度可达3 100m/s。
|
关 键 词: | 爆炸箔 Al/Ni 电爆性能 飞片速度 |
Study on Electrical Characteristic and Flyer Driven Ability of Al/Ni Exploding Foil |
| |
Abstract: | The Al/Ni exploding foil was successfully fabricated by traditional MEMs technology. The electrical performance of Al/Ni exploding foil was investigated under 4kV voltage. It is found that the maximum energy transformation efficiency comes to 18%, which is higher than that of Cu exploding foil. The phenomenon of short exploding time, low electrical energy, and concentrating output energy was showed for Al/Ni multilayer foil. Meanwhile, the flyer velocity is increased by improving input voltage and foil thickness, and the flyer velocity comes to 3 100m/s under 5kV voltage and 3μm thickness of Al/Ni. |
| |
Keywords: | Exploding foil Al/Ni Electrical performance Flyer velocity |
本文献已被 CNKI 万方数据 等数据库收录! |
|