| 硅集成爆炸箔组件起爆HNS-IV试验研究 |
| |
| 引用本文： | 郭菲,施志贵,蒋小华,何碧,付秋菠.硅集成爆炸箔组件起爆HNS-IV试验研究[J].火工品,2009(6). |
| |
| 作者姓名： | 郭菲 施志贵 蒋小华 何碧 付秋菠 |
| |
| 作者单位： | 1. 中国工程物理研究院化工材料研究所,四川,绵阳,621900
2. 中国工程物理研究院电子工程研究所,四川,绵阳,621900 |
| |
| 基金项目： | 中国工程物理研究院重大预研项目 |
| |
| 摘 要： | 基于MEMS加工技术,设计制造了一种以硅为基底的集成爆炸箔组件.利用该爆炸箔组件,进行了起爆HNS-IV炸药的试验研究.结果表明,设计制造的爆炸箔组件参数合理,在3.5kA电流条件下可以起爆HNS-IV炸药.
|
| 关 键 词： | 冲击片雷管 爆炸箔组件 起爆 |
The Test Research on the Initiation of HNS-IV by An Integrated Silicon Exploding Foil Assembly |
| |
| GUO Fei,SHI Zhi-gui,JIANG Xiao-hua,HE Bi,FU Qiu-bo.The Test Research on the Initiation of HNS-IV by An Integrated Silicon Exploding Foil Assembly[J].Initiators & Pyrotechnics,2009(6). |
| |
| Authors: | GUO Fei SHI Zhi-gui JIANG Xiao-hua HE Bi FU Qiu-bo |
| |
| Abstract: | This paper described the prdiminary research on the slapper detonator which principany utilized the MEMS technology and process.And an exploding foil assembly based on1 the Si MEMS process was manufactured.This kind of exploding foil assembly has been used in the test of initiating the HNS-IV.The results of the test shows that the design of this kind of exploding foil assembly is feasible and the exploding foil assembly can successfully initiate the HNS-IV under 3.5Acurrent condition. |
| |
| Keywords: | MEMS MEMS Slapper detonator Exploding foil assembly Initiation |
| 本文献已被 万方数据 等数据库收录！ |
|
