| 一种新型陶瓷的冲蚀磨损耐磨性 |
| |
| 引用本文： | 茅东升,郦剑.一种新型陶瓷的冲蚀磨损耐磨性[J].稀有金属材料与工程,1997,26(3):45-49. |
| |
| 作者姓名： | 茅东升 郦剑 |
| |
| 作者单位： | 浙江大学材料系，中国科学院上海冶金研究所 |
| |
| 摘 要： | 对ＴｉＣ及Ａｌ２Ｏ３粉末进行表面改性，在其表面均匀包覆一层钴膜，然后再用热等静压制备出硬度和韧性较较理想的Ａｌ２Ｏ３－ＴｉＣ－Ｃｏ新型金属陶瓷，该材料的断裂韧性比未改性的ＡＴ３０材料有较大的提高，硬度两者相当，并对ＡＴ３０和ＡＴＣ材料的冲蚀行为及冲蚀机制进行了比较研究，研究表明，无论在高角还是在底角冲蚀条件下，其抗冲蚀性能优于Ａｌ２Ｏ３－ＴｉＣ陶瓷，尤其是在高角冲蚀条件下。
|
| 关 键 词： | ATC陶瓷 冲蚀磨损 耐磨性 金属陶瓷 粉末 |
Erosion Resistance of a New Type of Ceramic |
| |
| Mao Dongsheng,Li Jian,Guo Shaoyi,Mao Zhiyuan.Erosion Resistance of a New Type of Ceramic[J].Rare Metal Materials and Engineering,1997,26(3):45-49. |
| |
| Authors: | Mao Dongsheng Li Jian Guo Shaoyi Mao Zhiyuan |
| |
| Abstract: | TiC and Al 2 O 3 ceramic powders were coated with a Co film, and then the treated powders were hot isostaic pressed to fabricate Al 2 O 3 -TiC-Co (ATC) fine cermet The fracture toughness of the ATC cermet is much higher than that of AT30 with no cobalt film Both ATC and AT30 cermets have about the same hardness The erosion behaviors and mechanisms of ATC and AT30 cermet have been compared It has been shown that the erosion resistance of ATC is better than that of AT30 at both high and low impact angles, especially the latter |
| |
| Keywords: | ATC ceramet erosion fracture toughness impact angle |
| 本文献已被 CNKI 维普 等数据库收录！ |
| 点击此处可从《稀有金属材料与工程》浏览原始摘要信息 |
|
点击此处可从《稀有金属材料与工程》下载全文 |
