|
|||||
|
|
| 高强钢板冲压全工序回弹补偿研究 | |
| 引用本文： | 谢晖,潘志红,洪健程,杨岩,张建,胡蕾.高强钢板冲压全工序回弹补偿研究[J].模具技术,2012(5):1-5,17. |
| 作者姓名： | 谢晖 潘志红 洪健程 杨岩 张建 胡蕾 |
| 作者单位： | 1. 湖南大学汽车车身先进设计制造国家重点实验室,湖南长沙,410082 2. 苏州金鸿顺汽车部件股份有限公司,江苏 苏州,215600 3. 天津汽车模具股份有限公司,天津,300308 |
| 基金项目： | 国家科技支撑计划项目(2012BAF12B20)“大型工程装备制造企业全球集成管控技术研究与应用示范” |
| 摘 要： | 回弹是高强钢板零件冲压中的一大难题,当前工程应用中回弹计算精度不高,仍然依赖大量修模解决回弹问题。采用全工序仿真计算和回弹补偿方法,提高回弹计算的数值模拟精度,并利用位移回弹补偿原理对拉深型面和修边型面进行回弹补偿,使冲压回弹后零件尺寸满足设计产品的精度要求。结果表明,该研究方法大大提高了高强钢冲压件的质量,实际生产应用效果良好。 |
| 关 键 词： | 高强钢板 冲压 位移 回弹补偿 |
Research on springback compensation based on fully cycle simulation of high strength steel stamping |
|
| XIE Hui , PAN Zhi-hong , HONG Jian-cheng , YANG Yan , ZHANG Jian , HU Lei.Research on springback compensation based on fully cycle simulation of high strength steel stamping[J].Die and Mould Technology,2012(5):1-5,17. | |
| Authors: | XIE Hui PAN Zhi-hong HONG Jian-cheng YANG Yan ZHANG Jian HU Lei |
| Affiliation: | XIE Hui,PAN Zhi-hong,HONG Jian-cheng,YANG Yan,ZHANG Jian,HU Lei |
| Abstract: | Springback is a big problem in stamping of high strength steel.Solution for springback relies greatly on mode repair since the accuracy of springback calculated in the current engineering application is not high.Whole process simulation and springback compensation method was used to improve the numerical simulation accuracy of springback.At the same time,springback compensation principle of displacement was used for springback compensation on the drawing surface and trimming surface in order to meet the dimension accuracy requirement of the product after the stamping springback.The result shows that this method greatly improves the quality of high strength steel stamping parts and used in production with good result. |
| Keywords: | high strength steel stamping displacement springback compensation |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ | |
