Über die Anwendung von Ionensensitiven Feldeffekttransistoren zur Untersuchung von Korrosionsvorgängen

On the application of ion sensitive field-effect transistors for the investigation of corrosion phenomena Ion sensitive field-effect transistors (ISFET) are chemical sensors based on semiconductor technology. They exhibit small dimensions, a plane measuring surface and have short response times. Thus, they are very suitable for the determination of local changes of the pH value at electrochemical corrosion studies. The described in this paper experimental set-up allows in situ measurements of the pH value by means of ISFET sensors in amounts of liquids below 1 mm³; the active surface area of the material under test may be below 1 mm². In model tests preferably changes of the pH value of dist. water due to the corrosion of steel St 38 have been investigated. After an initial short-time rise caused by oxygen reduction a decay of the pH value to pH = 3 ?4 was obseved. Furthermore, ISFET sensors have been used as a potential probe for electrochemical polarization measurements in low conductive media. It was shown, that the dynamic behaviour of potentiostatic control circuits may be influenced favourably by the low output resistance of the ISFET.