首页 | 官方网站   微博 | 高级检索  
     

低碳钢中晶界铁素体/原奥氏体界面对贝氏体转变的影响
引用本文:崔桂彬,郭晖,杨善武,贺信莱.低碳钢中晶界铁素体/原奥氏体界面对贝氏体转变的影响[J].金属学报,2009,45(6):680-686.
作者姓名:崔桂彬  郭晖  杨善武  贺信莱
作者单位:北京科技大学材料科学与工程学院,北京,100083
基金项目:国家自然科学基金项目50601002和教育部留学回国基金项目资助
摘    要:采用电子背散射衍射 (EBSD) 研究了低碳Fe--C--Mn--Si钢中晶界铁素体/原奥氏体界面对贝氏体形核的影响. 通过两阶段等温热 处理, 获得了晶界铁素体和贝氏体的混合组织. 结合金相观察和取向测量, 发现晶界铁素体与贝氏铁素体之间的界面分为两种, 一种界面不清晰, 一种界面清晰. 分析表明, 在晶界铁素体/贝氏体界面不清晰一侧, 晶界铁素体与原奥氏体保持取向关系, 贝氏体在这类界面形 核生长, 且取向与晶界铁素体保持一致; 在晶界铁素体/贝氏体界面清晰一侧, 晶界铁素体与原奥氏体无取向关系, 且贝氏体与晶界铁素体之间取向差较大.

关 键 词:低碳钢  晶界铁素体  贝氏体  相界面  形核  取向关系
收稿时间:2008-11-25
修稿时间:2009-02-11

INFLUENCE OF INTERFACE BETWEEN GRAIN BOUNDARY FERRITE AND PRIOR AUSTENITE ON BAINITE TRANSFORMATION IN A LOW CARBON STEEL
CUI Guibin,GUO Hui,YANG Shanwu,HE Xinlai.INFLUENCE OF INTERFACE BETWEEN GRAIN BOUNDARY FERRITE AND PRIOR AUSTENITE ON BAINITE TRANSFORMATION IN A LOW CARBON STEEL[J].Acta Metallurgica Sinica,2009,45(6):680-686.
Authors:CUI Guibin  GUO Hui  YANG Shanwu  HE Xinlai
Affiliation:School of Materials Science and Engineering, University of Science and Technology Beijing, Beijing 100083
Abstract:The low carbon bainitic steels gain increasing attention due to their high strength, high toughness, and good weldability. To improve the toughness and weldability of this kind of steel the carbon concentration is usually deduced to below 0.06% (mass fraction). As a result the hardenability of the steel is decreased and the ferrite usually becomes the first phase formed during the cooling process before the austenite transforms to the bainite. To decrease the nucleation activation barrier the grain boundary ferrite prefers to nucleate at the prior austenite grain boundaries, which are also potential nucleation sites for the bainite. The prior austenite grain boundaries are occupied by the ferrite, meanwhile ferrite/austenite interfaces are formed, which may influence the following nucleation of bainite. To understand the effect of grain boundary ferrite/prior austenite interface on the nucleation of bainite, a low carbon Fe--C--Mn--Si steel was investigated using optical microscope and electron back--scattering diffraction (EBSD). The grain boundary ferrite and bainite were formed during the two--step isothermal holding. By combining metallographic observation with orientation measurement, two kinds of interfaces were found between grain boundary ferrite and bainitic ferrite: one is non--clear interface, and another is clear interface. The analyses show that grain boundary ferrite has nearly the K--S orientation relationship with the prior austenite on the non--clear interface side, at which bainite nucleates and grow with an orientation similar to the grain boundary ferrite, while the grain boundary ferrite has a random orientation relationship with the prior austenite on the clear interface side, and large misorientation exists between bainite and grain boundary ferrite.
Keywords:low carbon steel  grain boundary ferrite  bainite  interface  nucleation  orientation relationship
本文献已被 CNKI 万方数据 等数据库收录!
点击此处可从《金属学报》浏览原始摘要信息
点击此处可从《金属学报》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司    京ICP备09084417号-23

京公网安备 11010802026262号