首页 | 官方网站   微博 | 高级检索  
     

多孔型阳极氧化膜的形成机理
引用本文:王平,魏晓伟.多孔型阳极氧化膜的形成机理[J].表面技术,2005,34(6):28-29,32.
作者姓名:王平  魏晓伟
作者单位:西华大学材料科学与工程学院,四川,成都,610039;西华大学材料科学与工程学院,四川,成都,610039
摘    要:通过对铝合金硬质阳极氧化过程的研究发现,在氧化膜形成的过程中氧化面产生大量气泡.气泡的出现使氧化面电流的分布状态发生改变、酸液与反应面的热传递效率降低、导电性变差,从而影响氧化膜的生长.由此提出气泡的产生会影响多孔型阳极氧化膜孔的萌生、位置分布以及孔的生长.通过建立气泡作用下氧化面孔洞形成的几何模型来探讨氧化膜孔萌生与生长.

关 键 词:阳极氧化  气泡  多孔型氧化膜
文章编号:1001-3660(2005)06-0028-02
收稿时间:2005-06-21
修稿时间:2005-06-21

Research on Mechanism of Film Forming of Porosity Anodic Oxide
WANG Ping,WEI Xiao-Wei.Research on Mechanism of Film Forming of Porosity Anodic Oxide[J].Surface Technology,2005,34(6):28-29,32.
Authors:WANG Ping  WEI Xiao-Wei
Affiliation:College of Materials and Engineering, Xihua University, Chengdu 610039, China
Abstract:Process of hard anodic oxidation by using A1 alloy was studied. Lots of air bubble were formed on the oxidation surface in the process of forming oxide film. Distribution state of current on oxidation surface will be changed. Heat transform ratio between acid liquid and reaction surface will be decreased. Electric conductivity will be declined and the growth of anodic oxide film was affected by the emergence of air bubble. Bourgeon, location distribution and growth of porosity anodic oxide film affected by the formed air bubble were brought forward. Bourgeon and growth of oxide film hole were discussed by setting up a model about the forming of oxide film hole under the effects of air bubble.
Keywords:Anodic oxidation  Air bubble  Porosity anodic oxide film
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司    京ICP备09084417号-23

京公网安备 11010802026262号