| 管件电磁成形电磁力分布特性分析 |
| |
| 引用本文： | 黄尚宇,常志华,田贞武,杨梅,王仲仁.管件电磁成形电磁力分布特性分析[J].塑性工程学报,2000,7(2):30-34. |
| |
| 作者姓名： | 黄尚宇 常志华 田贞武 杨梅 王仲仁 |
| |
| 作者单位： | 1. 武汉汽车工业大学材料科学与工程学院,武汉,430070
2. 哈尔滨工业大学材料科学与工程学院,哈尔滨,150001 |
| |
| 基金项目： | 国家自然科学基金!(5 995 0 71)，湖北省自然科学基金!
(98J0 2 7)，塑性成形模拟及模具技术国家重点实验室资助 |
| |
| 摘 要： | 本文基于安培力定理建立了管件电磁成形时径向和轴向电磁力的计算公式 ,直观描述了线圈 -工件系统几何参数与电磁力幅值的对应关系 ,阐述了轴向电磁力对提高材料成形性能的作用 ,用数值方法分析了径向和轴向电磁力的分布特性。分析表明 ,细管较粗管成形困难 ,轴向电磁力在管端最大 ,忽略轴向电磁力会导致终态变形分析值小于实际值。
|
| 关 键 词： | 管件 电磁成形 电磁力 分布特性 |
| 修稿时间： | 1999-11-3 |
ANALYSIS OF ELECTROMAGNETIC FORCE IN ELECTROMAGNETIC TUBE FORMING |
| |
| HUANG Shang-yu,CHANG Zhi-hua,TIAN Zhen-wu,YANG Mei,WANG Z.R.ANALYSIS OF ELECTROMAGNETIC FORCE IN ELECTROMAGNETIC TUBE FORMING[J].Journal of Plasticity Engineering,2000,7(2):30-34. |
| |
| Authors: | HUANG Shang-yu CHANG Zhi-hua TIAN Zhen-wu YANG Mei WANG ZR |
| |
| Abstract: | The formula of calculating radial and axial electromagnetic force are concluded in electromagnetically tube forming.The relation between the amplitude of electromagnetic force and geometry parameters of coil\|workpiece system is described.The effect of axial electromagnetic force on forming limit is discussed.By numerical method,The distribution of radial and axial electromagnetic force is analyzed.The analysis shows that it is much more difficult to form a minor diameter tube than a major one.It can be concluded that the maximum of axial electromagnetic force lies at the ends of the tube,and the predicting value of the final deformation will be less than the actual one if the axial electromagnetic force is neglected. |
| |
| Keywords: | tube electromagnetic forming electromagnetic force distributing characteristics |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
