首页 | 官方网站   微博 | 高级检索  
     

LD2铝合金真空钎焊用铝基钎料的制备及性能研究
引用本文:陈忠宝,路文江,俞伟元,陈学定,张静,康凯.LD2铝合金真空钎焊用铝基钎料的制备及性能研究[J].热加工工艺,2006,35(19):48-50.
作者姓名:陈忠宝  路文江  俞伟元  陈学定  张静  康凯
作者单位:兰州理工大学,甘肃省有色金属新材料国家重点实验室,甘肃,兰州,730050
摘    要:利用快速凝固技术制备了8种Al-Si-Cu-Ni四元合金钎料,研究了合金元素对铝基钎料性能的影响。实验结果表明:随着Cu含量的增加,钎料的熔点大大降低,且钎料的铺展面积和抗拉强度都呈现先增加后降低的趋势:随着Si含量的增加,钎料的熔点和抗拉强度皆为先增加后降低,同时钎料的铺展面积明显增加。

关 键 词:真空钎焊  铝基钎料  性能
文章编号:1001-3814(2006)19-0048-03
收稿时间:2006-06-06
修稿时间:2006年6月6日

Preparation of Al-based Brazing Foils Used for Vacuum Brazing of LD2 Aluminium Alloy and Its Property Research
CHEN Zhong-bao,LU Wen-jiang,YU Wei-yuan,CHEN Xue-ding,ZHANG Jing,KANG Kai.Preparation of Al-based Brazing Foils Used for Vacuum Brazing of LD2 Aluminium Alloy and Its Property Research[J].Hot Working Technology,2006,35(19):48-50.
Authors:CHEN Zhong-bao  LU Wen-jiang  YU Wei-yuan  CHEN Xue-ding  ZHANG Jing  KANG Kai
Affiliation:State Key Lab. of Gansu Advanced Non-ferrous Metal Materials,Laazhou Univ. of Tech.,Lanzhou 730050,China
Abstract:Eight kinds of Al-Si-Cu-Nii ribbons were prepared by means of rapid solidification,the effects of alloy elements on properties of Al-based alloys were analyzed. The results indicate that with the increase of Cu content,the melting point of brazing foils decreases, the spreading area and tensile strehgth first increase and then decrease.With the increase of Si content, the melting point and tensile strehgth first increase and then decrease , the spreading area of brazing foils increases obviously.
Keywords:vacuum brazing  Al-based brazing foils  property
本文献已被 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司    京ICP备09084417号-23

京公网安备 11010802026262号