| 软盘包装盒注射模设计 |
| |
| 引用本文： | 钟玲,范植坚.软盘包装盒注射模设计[J].模具工业,2005(8):35-36. |
| |
| 作者姓名： | 钟玲 范植坚 |
| |
| 作者单位： | 西安工业学院,西安,710032 |
| |
| 摘 要： | 针对塑件纵深较大且有侧孔的情况,设计中采用斜导柱结构完成大纵深造型,同时侧面利用弹簧滑块机构实现侧抽芯,模具结构精巧,运行顺畅。
|
| 关 键 词： | 注射模 斜导柱 弹簧滑块机构 |
| 文章编号： | 1001-2168(2005)08-0035-02 |
| 收稿时间： | 02 15 2004 12:00AM |
| 修稿时间： | 2004年2月15日 |
Design of the Injection Mould for Floppy Cases |
| |
| ZHONG Ling,FAN Zhi-jian.Design of the Injection Mould for Floppy Cases[J].Die & Mould Industry,2005(8):35-36. |
| |
| Authors: | ZHONG Ling FAN Zhi-jian |
| |
| Abstract: | According to the structure characteristics of the plastic floppy case with big depth and side holes,an angular pin structure is used in the design of the mould for the plastic part to complete the shaping of the big depth,and a spring_slide structure is used to realize side core_pulling.The mould structure is compact and smart and is in good operation. |
| |
| Keywords: | injection mould angular pin spring_slide structure |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
