| 串珠机物流套注射模设计 |
| |
| 引用本文： | 廖应学,赵佳萌,周明理,杨娟.串珠机物流套注射模设计[J].模具工业,2021(2):53-55. |
| |
| 作者姓名： | 廖应学 赵佳萌 周明理 杨娟 |
| |
| 作者单位： | 百色职业学院;柳州城市职业学院;北海职业学院 |
| |
| 基金项目： | 广西高校中青年教师能力提升项目(2019KY1429,2019KY1432);北海职业学院2019年度科研课题项目(2910YKZ02)。 |
| |
| 摘 要： | 设计了带双层哈夫滑块脱模机构的三板模实现串珠机物流套的注射成型,针对塑件外壁脱模困难,使用2层哈夫滑块机构对塑件的外壁实施侧抽芯脱模,两层哈夫滑块的驱动分别由三板模的2次分型驱动。实践证明,模具结构和脱模机构布置合理,具有一定的参考作用。
|
| 关 键 词： | 哈夫滑块 双层抽芯 串珠机物流套 注射成型 浇注系统 |
Design of injection mould for beading machine logistics set |
| |
| LIAO Ying-xue,ZHAO Jia-ming,ZHON Ming-Li,YANG Juan.Design of injection mould for beading machine logistics set[J].Die & Mould Industry,2021(2):53-55. |
| |
| Authors: | LIAO Ying-xue ZHAO Jia-ming ZHON Ming-Li YANG Juan |
| |
| Affiliation: | (Baise Vocational College,Baise,Guangxi 533000,China;Liuzhou City Vocational College,Liu-zhou,Guangxi 545036,China;Beihai Vocational College,Beihai,Guangxi 536000,China) |
| |
| Abstract: | A kind of three-plate mould with double-layer half slider demoulding mechanism was designed to realize the injection moulding for the beading machine logistics set.Aiming at the difficulty of demoulding for the outer wall of the plastic part,the two-layer half slider mechanism was used to complete the side core-pulling of the outer wall of the plastic part.The two-layer half slider was driven by the twice parting of the three board mould.The practice showed that the layout of mould structure and demoulding mechanism was reasonable. |
| |
| Keywords: | half slider double-layer core pulling beading machine logistics set injection mould?ing gating system |
| 本文献已被 CNKI 维普 等数据库收录！ |
|
