首页 | 官方网站   微博 | 高级检索  
     

氢对310不锈钢钝化膜的影响
引用本文:曾一民,林昌健.氢对310不锈钢钝化膜的影响[J].中国腐蚀与防护学报,1999,19(4):233-238.
作者姓名:曾一民  林昌健
作者单位:[1]北京科技大学材料物理系 [2]厦门大学化学系
基金项目:国家自然科学基金,厦门大学表面物理化学国家重点实验室开放课题资助
摘    要:采用电化学和STM方法研究了氢对310不锈钢阳极极化过程,钝化膜形成过程和表面形貌特征以及膜耐点蚀性能的影响,并进行了相应的理论分析。研究表明:氢会降低不锈钢的自腐蚀电位,缩短钝化区域并使其向低电位方向偏移;降低反应电阻,增大钝化电流工,降低膜在纳米尺度上的结晶度和耐点蚀性能。

关 键 词:  阳极极化  钝化膜  点蚀

EFFECTS OF PRE-CHARGED HYDROGEN ON PASSIVE FILM OF TYPE 310 STAINLESS STEEL
ZENG Yi-min,QIAO Li-jie,XU Ting-jun,LI Shen,CHU Wu-yang.EFFECTS OF PRE-CHARGED HYDROGEN ON PASSIVE FILM OF TYPE 310 STAINLESS STEEL[J].Journal of Chinese Society For Corrosion and Protection,1999,19(4):233-238.
Authors:ZENG Yi-min  QIAO Li-jie  XU Ting-jun  LI Shen  CHU Wu-yang
Abstract:The effects of hydrogen on anodic process, film formation surface character and pitting-resistance of passive film on type 310 stainless steel were theoretically analyzed and experimentally studied by use of electrochemical and STM methods. The results showed that hydrogen can decrease the inner energy of the stainless steel and its corrosion potential, narrow the passivation region and increase its anodic dissolution; decrease the reactive resistance, enhance the passive current density; reduce crystallinity of the film in nanometer scale and the pitting resistance. These influences were more noticable when increasing the pre-charged hydrogen content in the steel. WT9.,12.HZ]
Keywords:Hydrogen  Anodic polarization  Passive film  Pitting
本文献已被 CNKI 维普 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司    京ICP备09084417号-23

京公网安备 11010802026262号