| 制动过程中热应力对C/C复合材料磨损表面形貌的影响 |
| |
| 引用本文： | 徐惠娟,易茂中,熊翔,黄伯云,梁月明,郭瑞.制动过程中热应力对C/C复合材料磨损表面形貌的影响[J].中国有色金属学报,2011,21(1). |
| |
| 作者姓名： | 徐惠娟 易茂中 熊翔 黄伯云 梁月明 郭瑞 |
| |
| 作者单位： | 中南大学,粉末冶金国家重点实验室,长沙,410083 |
| |
| 基金项目： | 国家重点基础研究发展计划资助项目(2006CB600906); 国家高技术研究发展计划资助项目(2009AA034301) |
| |
| 摘 要： | 以炭纤维针刺整体毡为预制体,经化学气相渗透和树脂浸渍增密方式得到C/C复合材料。采用有限元分析软件,模拟飞机在正常着陆条件下,刹车盘在制动过程中的热应力分布,并研究热应力对C/C复合材料磨损表面形貌的影响。结果表明:热应力是由于摩擦热的不均匀分布引起的。在摩擦表面外径处温度较高,产生的热应力较大,最大值约为3.15 MPa;而在靠近内径处温度较低,热应力较小,约为1.78 MPa。内、外径处热应力的差异导致磨损表面具有两种不同的组织形貌;靠近外径处的磨损表面比较粗糙,摩擦膜不完整,颜色暗淡,为暗带的组织形貌,摩擦性能较差;而靠近内径处的磨损表面光滑,摩擦膜连续稳定,颜色明亮,为亮带的组织形貌,摩擦性能较好。
|
| 关 键 词： | C/C复合材料 有限元 热应力 磨损表面 |
Effect of thermal stress on worn surface morphology of C/C composites during braking |
| |
| XU Hui-juan,YI Mao-zhong,XIONG Xiang,HUANG Bai-yun,LIANG Yue-ming,GUO Rui.Effect of thermal stress on worn surface morphology of C/C composites during braking[J].The Chinese Journal of Nonferrous Metals,2011,21(1). |
| |
| Authors: | XU Hui-juan YI Mao-zhong XIONG Xiang HUANG Bai-yun LIANG Yue-ming GUO Rui |
| |
| Affiliation: | XU Hui-juan,YI Mao-zhong,XIONG Xiang,HUANG Bai-yun,LIANG Yue-ming,GUO Rui (State Key Laboratory of Powder Metallurgy,Central South University,Changsha 410083,China) |
| |
| Abstract: | The thermal stress field of C/C composites with needled carbon fiber perform densified by chemical vapor infiltration and impregnating resin was simulated by finite element method in simulating normal landing.And the effect of thermal stress on the worn surface morphology was investigated.The results show that the thermal stress is caused by the existence of the non-uniform frictional heat on the contact surface.The temperature and thermal stress near the outer diameter of the friction surface are higher th... |
| |
| Keywords: | C/C composites finite element thermal stress worn surface |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
