| S355钢焊接温度场和应力场有限元分析 |
| |
| 引用本文： | 段卫军,邓鸿剑,陈北平,邱培现,陈静青.S355钢焊接温度场和应力场有限元分析[J].电焊机,2021,51(2):31-36. |
| |
| 作者姓名： | 段卫军 邓鸿剑 陈北平 邱培现 陈静青 |
| |
| 作者单位： | 中车青岛四方机车车辆股份有限公司,山东青岛 266311;中车青岛四方机车车辆股份有限公司,山东青岛 266311;中车青岛四方机车车辆股份有限公司,山东青岛 266311;中车青岛四方机车车辆股份有限公司,山东青岛 266311;西南交通大学,四川成都610031 |
| |
| 摘 要： | S355钢作为低合金钢,在焊接过程中会伴随着固态相变现象。在考虑S355钢的固态相变效应基础上,建立了焊接过程的热弹塑性有限元模型。通过引入相变转变模型、相变塑性和相变体积模型,计算获得焊后组织分布云图,并分析了焊缝和热影响区典型节点的组织演变规律。结果表明,与不考虑固态相变效应相比,紧邻焊缝两侧的热影响区的Mises应力大幅降低,计算得到的残余应力值与实测值吻合较好。
|
| 关 键 词： | S355钢 固态相变 微观组织 残余应力 |
Finite element analysis of welding temperature field and stress field of S355 steel |
| |
| DUAN Weijun,DENGHongjian,CHENBeiping,QIUPeixian,CHEN Jingqing.Finite element analysis of welding temperature field and stress field of S355 steel[J].Electric Welding Machine,2021,51(2):31-36. |
| |
| Authors: | DUAN Weijun DENGHongjian CHENBeiping QIUPeixian CHEN Jingqing |
| |
| Affiliation: | (CRRC Qingdao Sifang Rolling Stock Co.,Ltd,Qingdao 266311,China;Southwest JiaoTong University,Chengdu 610031,China) |
| |
| Abstract: | S355 steel is a low alloy steel,which is accompanied by solid phase transformation during welding.Based on the solid phase transformation effect of S355 steel,a thermalstress finite element model of welding process was established.The microstructure evolution law in the weld and heat affected zone was analyzed.The results show that under the effect of solid phase transformation,the Mises stress of the weld decreased.The residual stress and deformation evolution curves of the heat affected zone with and without phase transformation were compared.The calculated residual stress was in good agreement with the measured value. |
| |
| Keywords: | S355 steel solid state transformation microstructure residual stress |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
