| 基于Pro/E和ADAMS联合仿真的夹钳机构设计与优化 |
| |
| 引用本文： | 姚晓光,郭晓松,冯永保,孟令辉.基于Pro/E和ADAMS联合仿真的夹钳机构设计与优化[J].机床与液压,2006(6):233-235,222. |
| |
| 作者姓名： | 姚晓光 郭晓松 冯永保 孟令辉 |
| |
| 作者单位： | 第二炮兵工程学院,西安,710025 |
| |
| 摘 要： | 在Pro/E环境下对初步设计的夹钳机构进行建模、装配及运动学仿真分析,发现模型运动学特性较差.为改善夹钳机构的运动学特性,将模型通过Mechanism/Pro接口程序导入ADAMS中进行优化设计,并在ADAMS中得到了改进机构模型的方法.在Pro/E下改进机构模型并再次进行运动学仿真,验证了改进结果的合理性.仿真结果表明,利用Pro/E和ADAMS联合仿真的方法可以为机械结构的优化设计提供一条有效路径.
|
| 关 键 词： | 联合仿真 夹钳机构 |
| 文章编号： | 1001-3881（2006）6-233-3 |
| 收稿时间： | 2005-05-16 |
| 修稿时间： | 2005-05-16 |
Design and Optimization of Clamp Mechanism Based on the United Simulation of Pro/E and ADAMS |
| |
| YAO Xiaoguang,GUO Xiaosong,FENG Yongbao,MENG Linghui.Design and Optimization of Clamp Mechanism Based on the United Simulation of Pro/E and ADAMS[J].Machine Tool & Hydraulics,2006(6):233-235,222. |
| |
| Authors: | YAO Xiaoguang GUO Xiaosong FENG Yongbao MENG Linghui |
| |
| Abstract: | Through the modeling, assembling and kinematic simulation analysis of the initially established clamp model under the environment of Pro/E, bad kinematic traits were found. The model was introduced into ADAMS through the Mechanism/Pro interface to optimize the kinematic traits and a way to improve the model was found. The way was validated in reason by improving the model and simulating again under Pro/E. Results show that the united simulating analysis of Pro/E and ADAMS can offer a valid method for the design and optimization of mechanical structures. |
| |
| Keywords: | Pro/E ADAMS |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
