| 硝胺和复合固体推进剂断裂韧性的试验测定 |
| |
| 引用本文： | 岳中豪,刘天生,景晓苏.硝胺和复合固体推进剂断裂韧性的试验测定[J].爆破器材,2013(6):47-51. |
| |
| 作者姓名： | 岳中豪 刘天生 景晓苏 |
| |
| 作者单位： | 中北大学化工与环境学院 山西太原,030051;中北大学化工与环境学院 山西太原,030051;中北大学化工与环境学院 山西太原,030051 |
| |
| 摘 要： | 为了研究硝胺推进剂（挤压成型和浇注成型）和复合固体推进剂的断裂韧性，文章采用非接触类型的视频引伸仪对固体推进剂CT试样进行断裂测试，测得厚度为38mm的3种试样断裂参数酶分别为：0．7546、0．0812、0．3368MPa·m^1/2，并且建立推进剂材料的失效评估图。发现挤压成型的硝胺推进剂断裂韧性比浇注成型硝胺推进剂和复合推进剂高，CT试样预估的失效载荷与试验结果能较好地吻合。
|
| 关 键 词： | 硝胺推进剂 HTPB推进剂 固有缺陷模型 失效评估图 紧凑拉伸试样 |
Test of Fracture Toughness of Nitramine and Composite Solid Propellants |
| |
| YUE Zhonghao,LIU Tiansheng,JING Xiaosu.Test of Fracture Toughness of Nitramine and Composite Solid Propellants[J].Explosive Materials,2013(6):47-51. |
| |
| Authors: | YUE Zhonghao LIU Tiansheng JING Xiaosu |
| |
| Affiliation: | Chemical Engineering and Environment College, North University of China ( Shanxi Taiyuan, 030051 ) |
| |
| Abstract: | To study the fracture toughness of nitramine （in extruded and slurry cast conditions） and composite solid propellants, a non-contacting type video extensometer was applied to test solid propellant CT specimens. The fracture parameters Kv for 3 samples with a thickness of 38mm were 0. 7546,0. 0812 and 0. 3368MPa· m1/2, respectively. The failure assessment diagrams of propellant material were generated. Fracture toughness of the extruded nitramine propellant was found to be higher than those of slurry cast nitramine propellant and composite propellant. Failure load estimates of CT specimens were found to be in good agreement with test results. |
| |
| Keywords: | nitramine propellant HTPB-based propellant inherent flaw model failure assessment diagram compact tension specimen |
| 本文献已被 维普 万方数据 等数据库收录！ |
