Growth of calcium carbonate by the atomic layer chemical vapour deposition technique

Thin films of CaCO₃ (calcite) have been grown with the atomic layer chemical vapour deposition (ALCVD) technique, using Ca(thd)₂ (Hthd=2,2,6,6-tetramethylheptan-3,5-dione), CO₂, and ozone as precursors. Pulse parameters for the ALCVD-type growth are found and self-limiting reaction conditions are established between 200 and 400 °C. Calcium carbonate films have been deposited on soda-lime glass, Si(100), -Al₂O₃(001), -Al₂O₃(012), -SiO₂(001), and MgO(100) substrates. The observed textures were: in-plane oriented films with 100](001)CaCO₃ 100](001)Al₂O₃ and 100](001)CaCO₃110](001)Al₂O₃ on -Al₂O₃(001), amorphous films on -Al₂O₃(012) when grown at 250 °C, and columnar oriented films on soda-lime glass, Si(001), -SiO₂(001), and MgO(100) substrates with (00l) and (104) parallel to the substrate plane at 250 and 350 °C, respectively. The film topography was studied by atomic force microscopy and AC impedance characteristics were measured on as-deposited films at room temperature. The films were found to be insulating with a dielectric constant (_r) typically approximately 8. Thin films of CaO were obtained by heat treatment of the carbonate films at 670 °C in a CO₂-free atmosphere, but the thermal decomposition led to a significant increase in surface roughness.