首页 | 官方网站   微博 | 高级检索  
     

KDP晶体柱面生长速率实时测量研究
引用本文:刘冰,王圣来,房昌水,顾庆天,孙洵,李毅平.KDP晶体柱面生长速率实时测量研究[J].无机材料学报,2006,21(1):22-28.
作者姓名:刘冰  王圣来  房昌水  顾庆天  孙洵  李毅平
作者单位:山东大学晶体材料国家重点实验室, 济南 250100
基金项目:国家科技攻关项目;山东大学校科研和教改项目;山东省博士基金
摘    要:KDP晶体生长速率高精度地实时测量有助于研究各种因素对晶体生长的影响. 本文用激光偏振干涉法实现了对KDP晶体柱面生长速率和死区的实时测量, 精度达到0.01μm/min. 籽晶 尺寸等实验条件影响测量的结果, 小尺寸(约2mm×2mm)的晶体更有利于死区的表征, 溶解阶段造成的晶体表面位错坑是出现干扰测量的“异常”现象的根源.

关 键 词:KDP晶体  死区  生长速率  实时测量  
文章编号:1000-324X(2006)01-0022-07
收稿时间:12 20 2004 12:00AM
修稿时间:2004-12-202005-02-02

In Situ Measurement of the Prismatic Faces Growth Rate of KDP Crystal
LIU Bing,WANG Sheng-Lai,FANG Chang-Shui,GU Qing-Tian,SUN Xun,LI Yi-Ping.In Situ Measurement of the Prismatic Faces Growth Rate of KDP Crystal[J].Journal of Inorganic Materials,2006,21(1):22-28.
Authors:LIU Bing  WANG Sheng-Lai  FANG Chang-Shui  GU Qing-Tian  SUN Xun  LI Yi-Ping
Affiliation:State Key Laboratory of Crystal Materials, Shandong University, Jinan 250100, China
Abstract:The measurement of KDP crystal growth rate is helpful to study on the effect of various factors on the growth of KDP crystal. In situ precise measurement of crystal growth rate and dead zone of KDP prismatic faces was achieved by using laser-polarization-interference technique. The experiment result is affected by various conditions such as crystal dimensions. It is found that the seed crystal of small dimensions is in favor of token on the dead zone. The dislocation etch pits produced when the solution temperature is higher than supersaturation point are considered to cause the abnormal phenomena disturbing the measurement.
Keywords:KDP  dead zone  growth rate  in situ measurement
本文献已被 CNKI 万方数据 等数据库收录!
点击此处可从《无机材料学报》浏览原始摘要信息
点击此处可从《无机材料学报》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司    京ICP备09084417号-23

京公网安备 11010802026262号