| 316L-16MnR复合板不锈钢侧晶间腐蚀原因分析 |
| |
| 引用本文： | 唐翠华,侯良立.316L-16MnR复合板不锈钢侧晶间腐蚀原因分析[J].理化检验(物理分册),2008,44(1):48-50,53. |
| |
| 作者姓名： | 唐翠华 侯良立 |
| |
| 作者单位： | 南化公司 化机厂,南京,210048 |
| |
| 摘 要： | 采用GB／T4334．5—2000标准方法对不锈钢-低合金钢复合板进行晶间腐蚀试验，对不锈钢侧产生裂纹的原因进行了分析。结果表明，由于不锈钢板与低合金钢板的结合面上存在着不可抗拒的碳迁移现象，致使不锈钢板侧过渡区内的奥氏体晶界上聚集着大量的网状碳化物，从而造成晶界上的缺陷，使其在经过硫酸．硫酸铜溶液的腐蚀后，进行弯曲时产生了大量的晶间腐蚀裂纹。
|
| 关 键 词： | 不锈钢-低合金钢复合板 碳迁移现象 晶间腐蚀 网状碳化物 裂纹 |
| 文章编号： | 1001-4012（2008）01-0048-03 |
| 收稿时间： | 2007-06-14 |
| 修稿时间： | 2007年6月14日 |
REASON ANALYSIS ABOUT INTERGRANULAR CORROSION ON STAINLESS STEEL SIDE OF 316L-16MnR CLADDING PLATE |
| |
| TANG Cui-hua,HOU Liang-li.REASON ANALYSIS ABOUT INTERGRANULAR CORROSION ON STAINLESS STEEL SIDE OF 316L-16MnR CLADDING PLATE[J].Physical Testing and Chemical Analysis Part A:Physical Testing,2008,44(1):48-50,53. |
| |
| Authors: | TANG Cui-hua HOU Liang-li |
| |
| Affiliation: | (Chemical Machinery Works, Nanjing Chemical Industry Group, Nanjing 210048, China) |
| |
| Abstract: | The cracksin stainless steel and low-alloy steel cladding plate were found after intergranular corrosin examination. The metallographic analysis results showed that, because of the irresistible transference of carbon in binding face between stainless steel plate and low-alloy steel plate, there were lots of netty carbide gathering in the austenitic grain boundary of transitional region of stainless steel plate, which caused the defect in boundary. After eroding in H2SO4-CuSO4 solution and then bending, it appeared lots Of intergranular corrosion cracks. |
| |
| Keywords: | Stainless steel and low-alloy steel cladding plate Carbon transference Intergranular corrosion Netty carbide Crack |
| 本文献已被 维普 万方数据 等数据库收录！ |
