| 基于模块化设计的自动拧紧系统的开发 |
| |
| 引用本文： | 陈鼎宁,江吉彬,马振飞,林巨广.基于模块化设计的自动拧紧系统的开发[J].工程设计学报,2006,13(2):87-90. |
| |
| 作者姓名： | 陈鼎宁 江吉彬 马振飞 林巨广 |
| |
| 作者单位： | 1. 福建工程学院,机电系,福建,福州,350014
2. 合肥工业大学,机械工程学院,安徽,合肥,230009 |
| |
| 基金项目： | 福建省青年科技人才创新基金;福建工程学院校科研和教改项目 |
| |
| 摘 要： | 为了解决目前螺栓(母)自动拧紧装备制造和维修周期过长，不能适应企业高效生产要求的问题，提出一种基于模块化设计的螺栓自动拧紧系统。基于对螺纹联接件装配的预紧力控制原理和拧紧工作过程的分析，将拧紧系统分成不同的功能单元，并从硬件和软件两方面对它们实施模块化设计，构建系列化的机械和电气模块单元，使系统获得快速组合和维修的能力。实际应用表明，该模块化设计的自动拧紧系统提高了装备的制造和维修效率。
|
| 关 键 词： | 拧紧机 预紧力 扭矩控制 模块化设计 |
| 文章编号： | 1006-754X（2006）02-0087-04 |
| 收稿时间： | 2005-01-12 |
| 修稿时间： | 2005年1月12日 |
Development of automatic tightening system based on modular design |
| |
| CHEN Ding-ning,JIANG Ji-bin,MA Zhen-fei,LIN Ju-guang.Development of automatic tightening system based on modular design[J].Journal of Engineering Design,2006,13(2):87-90. |
| |
| Authors: | CHEN Ding-ning JIANG Ji-bin MA Zhen-fei LIN Ju-guang |
| |
| Affiliation: | 1. Department of Mechanic-Electronic Engineering, Fujian University of Technology, Fuzhou 350014, China; 2. School of Mechanical Engineering, Hefei University of Technology, Hefei 230009, China |
| |
| Abstract: | To shorten the period of manufacturing and repairing of automatic tightening machine for screw and meet the high-efficiency requirement of enterprises, an automatic tightening system for screw based on modular design is proposed. On the basis of analysis on control principle of pre-tightening force and tightening process, this system is divided into various functional units and applies modular design from software and hardware. Furthermore, a series of mechanical and electric units are established to make this system be able to be assembled and repaired rapidly. Practical application indicates that this system can enhance the efficiency of repair and manufacture. |
| |
| Keywords: | automatic tightening machine pre-tightening force torque control modularization design |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
| 点击此处可从《工程设计学报》浏览原始摘要信息 |
|
点击此处可从《工程设计学报》下载全文 |
|
