首页 | 官方网站   微博 | 高级检索  
     

Ag合金化对热挤压前后耐热Al-Cu-Mg合金组织和性能的影响
引用本文:肖代红,王健农,陈世朴,杨海龙,丁冬雁.Ag合金化对热挤压前后耐热Al-Cu-Mg合金组织和性能的影响[J].材料开发与应用,2002,17(6):1-4.
作者姓名:肖代红  王健农  陈世朴  杨海龙  丁冬雁
作者单位:上海交通大学材料科学与工程学院,上海,200030
基金项目:国家“973”重点基础研究发展规划项目基金资助(G19990 6 490 0 9 0 2 )
摘    要:采用拉伸力学性能测试和金相分析 ,研究了Ag合金化对热挤压前后耐热Al Cu Mg合金组织与性能的影响。结果表明 ,Ag的微合金化可以改善热挤压后Al Cu Mg合金的显微组织 ,明显提高合金的强度、延伸率及高温热稳定性。显微组织分析认为 ,这主要归功于合金化后析出的Ω相的沉淀硬化。

关 键 词:银合金化  铝合金  热挤压  力学性能  显微组织
文章编号:1003-1545(2002)06-0001-04
修稿时间:2002年5月28日

Effect of Metalized Ag on Microstructure and Properties of Heat Resistant Al-Cu-Mg Alloy Before and After Hot Extrusion
Xiao Daihong,Wang Jiannong,Chen Shipu,Yang Hailong,Ding Dongyan.Effect of Metalized Ag on Microstructure and Properties of Heat Resistant Al-Cu-Mg Alloy Before and After Hot Extrusion[J].Development and Application of Materials,2002,17(6):1-4.
Authors:Xiao Daihong  Wang Jiannong  Chen Shipu  Yang Hailong  Ding Dongyan
Abstract:The effect of metalized Ag on microstructure and properties of heat resistant Al-Cu-Mg alloy are investigated by tensile test and metallographic analysis. The results show that microstructure of Al-Cu-Mg alloy is improved, and strength, plasticity and thermal stability are increased respectively with metalized Ag which is mainly attribute to precipitation of Ω phase.
Keywords:Metalized Ag  Aluminum alloy  Hot extrusion  Mechanical property  Microstructure
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司    京ICP备09084417号-23

京公网安备 11010802026262号