首页 | 官方网站   微博 | 高级检索  
     

基于光束扫描方法制作取样光栅的实验研究
引用本文:陈向飞,夏历,殷玉,谢世钟,李栩辉.基于光束扫描方法制作取样光栅的实验研究[J].高技术通讯,2001,11(10):46-49.
作者姓名:陈向飞  夏历  殷玉  谢世钟  李栩辉
作者单位:清华大学电子工程系
基金项目:863计划资助项目 ( 863 30 7 16 1)
摘    要:报道了一种基于光束扫描方法采用普通均匀相位模板和连续的 2 4 4nm倍频氩离子激光器 ,制作波长间隔为 0 .8nm和 1.6nm取样光栅的新技术 ,并对得到的实验结果进行了分析。研制的取样光栅波长间隔均匀 ,具有良好的谱特性。采用的方法操作简单、灵活 ,可方便地制作不同类型的取样光栅。

关 键 词:取样光纤光栅  均匀相位模板  光束扫描
修稿时间:2000年9月28日

Experimental Investigations of Fabrication of Sampled Fiber Gratings Based on Beam Scanning Method
Li Xuhui,Chen Xiangfei,Xia Li,Yin Yuzhe,Xie Shizhong.Experimental Investigations of Fabrication of Sampled Fiber Gratings Based on Beam Scanning Method[J].High Technology Letters,2001,11(10):46-49.
Authors:Li Xuhui  Chen Xiangfei  Xia Li  Yin Yuzhe  Xie Shizhong
Abstract:A novel fabrication technique of sampled fiber gratings based on beam scanning method is reported. In the experiment a CW frequency-doubled argon-ion laser operating at 244nm and normal uniform phase masks are used. As a result, the sampled gratings with wavelength spacing of 0 8nm and 1 6nm respectively have been demonstrated in the conventional single-mode fiber with hydrogen loading. The fabricated sampled fiber gratings have uniform wavelength spacing and good spectrum profile. The reported technique is simple and flexible for the fabrication of various sampled fiber gratings.
Keywords:Sampled fiber grating  Uniform phase mask  Beam scanning
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司    京ICP备09084417号-23

京公网安备 11010802026262号