| 金属基表面Al2O3-SiO2涂层耐冲蚀性能的研究 |
| |
| 引用本文： | 赵世海,蒋秀明,吕超.金属基表面Al2O3-SiO2涂层耐冲蚀性能的研究[J].功能材料,2007,38(A10):3880-3882. |
| |
| 作者姓名： | 赵世海 蒋秀明 吕超 |
| |
| 作者单位： | [1]天津工业大学机械电子学院,天津300160 [2]天津工业大学材料化学学院,天津300160 |
| |
| 基金项目： | 天津市科委基金资助项目（06YFJMJC02600） |
| |
| 摘 要： | 结合炼钢转炉用风机因炉气而导致叶片磨蚀较快的实际情况，从改善叶片材料的角度出发，采用溶胶-凝胶法制备Al2O3-SiO2涂层用在金属基体上进行试验。结果表明在含3％（质量分数）Si02磨粒的水介质中，单一三层的SiO2涂层、SiO2-Al2O3-SiO2涂层及混合溶胶制备的复合涂层的耐冲蚀性相近，均比单一三层的Al2O3涂层及A12O3-Sio2-Al2O3涂层好。混合溶胶制备的复合涂层在3％（质量分数）SiO2磨粒的酸性介质中表现出了良好的耐冲蚀性。
|
| 关 键 词： | 溶胶凝胶 Al2O3-SiO2涂层 耐冲蚀 |
| 文章编号： | 1001-9731（2007）增刊-3880-03 |
| 修稿时间： | 2007-04-23 |
Experimental study on corrosion-resistance coating on metal materials for converter fan blade |
| |
| Affiliation: | 1.School of Mechanical and Electronic Engineering, Tianjin Polytechnic University, Tianjin 300160, China; 2.School of Material Science and Chemical Engineering, Tianjin Polytechnic University, Tianjin 300160, China |
| |
| Abstract: | Based on the reality of the rapid abrasion and corrosion in the converter fan blade due to the gas, as viewed from perfecting the blade material, SiO2-Al2O3coating on the metal substrate was prepared by sol-gel method, and all coatings are there-layers. The results show that in water containing 3wt% SiO2 abrasive particles, the erosive wear resistance of three-layer Sit2 coating is approximately equal to that of SiO2-Al2O3-SiO2 coating and composite coating by mixture sol, and better than that of three-layer Al2O3 coating and Al2O3-SiO2-Al2O3 coating. The composite coating the mixture sol possesses of good erosive wear resistance in acid medium containing 3wt% SiO2 abrasive particles. |
| |
| Keywords: | sol-gel SiO2-Al2O3 coating corrosion-resistance |
| 本文献已被 维普 等数据库收录！ |
