TZNA合金冷变形过程中的组织和性能研究 |
| |
引用本文: | 林海峰,奚正平,卢亚峰,曹继敏,杨宏进.TZNA合金冷变形过程中的组织和性能研究[J].中国材料科技与设备,2011(1):68-70. |
| |
作者姓名: | 林海峰 奚正平 卢亚峰 曹继敏 杨宏进 |
| |
作者单位: | [1]西安建筑科技大学材料科学与工程学院,陕西西安710055 [2]西北有色金属研究院,陕西西安710016 |
| |
基金项目: | 2010年国家火炬计划产业化项目(2010GH031778) |
| |
摘 要: | 研究了TZNA β钛合金冷变形过程中的组织和性能。采用辊模冷拉拔的方式分别进行了20%、40%和60%冷变形,合金表现出良好的冷加工性能。当冷变形在20%时,出现了孪晶组织,使合金强度有明显提升。当冷变形量超过20%时,滑移成为了主要的变形方式。当冷变形达到60%时,晶粒完全破碎,晶粒尺寸在20-40nm之间,具有较高的强度和塑性。
|
关 键 词: | TZNA β钛合金 冷变形 显微组织 性能 |
Microstructure and Mechanical Properties of TZNA Alloy during Cold Deformation |
| |
Affiliation: | LIN Hai - feng , XI Zhen --gping, LU Ya -- feng, CAO Ji -min, YANG Hong -jin (1. Xi'An University of Architecture and Technology Shanxi, Xi' an, 710055, China 2. Northwest Institute For Nonferrous Metal Reseach, Shanxi, Xi' an, 710021, China) |
| |
Abstract: | Microstructure and mechanical properties of TZNA alloy during cold deformation was investigated, cold deforrnationwas carried out for 20% ,40%and60% deformation of the studied alloy, the alloy exhibited excellent workability. Twins appeared when the reduction of cold deformation was 20%. Slipping contributed much to plastic deformation in further. When thereduction reaches 60% ,small grains ranging form 20nm-40 nm, the alloy exhibited high strength and high plasticity. |
| |
Keywords: | TZNA β titanium alloys Cold deformation Microstructure Property |
本文献已被 维普 等数据库收录! |
|