| STM32的环保型便携式3D打印机研制 |
| |
| 引用本文： | 孙超林,王鑫,李前,卢雁飞,江良义.STM32的环保型便携式3D打印机研制[J].单片机与嵌入式系统应用,2017,17(4). |
| |
| 作者姓名： | 孙超林 王鑫 李前 卢雁飞 江良义 |
| |
| 作者单位： | 天津理工大学工程训练中心,天津,300384 |
| |
| 基金项目： | 国家级大学生创新创业训练计划项目资助 |
| |
| 摘 要： | 本文以STM32F1系列32位微处理器作为主控芯片,混合式步进电机为XYZ三轴提供动力,构成小型便捷式3D打印机.该打印机可通过SD卡进行脱机离线打印,减少对主机的依赖,提高便携性,还配备了触摸屏控制功能,使控制界面更加简单明了,降低了操作失误的可能性;同时采用环保型材料PLA(Polylactic Acid,即聚乳酸),打印过程中不产生任何有害物质,打印产品可用于家庭、办公室等环境.
|
| 关 键 词： | STM32 步进电机 SD卡 触摸屏 3D打印机 |
Environmental Protection and Portable 3D Printer Based on STM32 |
| |
| Sun Chaolin,Wang Xin,Li Qian,Lu Yanfei,Jiang Liangyi.Environmental Protection and Portable 3D Printer Based on STM32[J].Microcontrollers & Embedded Systems,2017,17(4). |
| |
| Authors: | Sun Chaolin Wang Xin Li Qian Lu Yanfei Jiang Liangyi |
| |
| Abstract: | In the project,the STM32F1 series 32-bit MCU is used as the master control chip,and the hybrid step-motor provides the power for X,Y and Z triaxial,those constitute a compact and convenient 3D printer.This printer can off-line print through the SD card,which can reduce the dependence on the host to improve the portability of the device.Besides,a touch-screen control function is equipped,which makes the control interface more straightforward and reduces the possibility of operator error.It also uses green materials-PLA (Polylactic Acid).In the printing process,no harmful substances is produced.The printed products can be used in homes,offices and other environments. |
| |
| Keywords: | STM32 step-motor SD Card touch screen 3D printer |
| 本文献已被 万方数据 等数据库收录！ |
|
