| 基于预报的烧结终点模糊控制 |
| |
| 引用本文： | 张晓龙,吴敏,向齐良,向婕.基于预报的烧结终点模糊控制[J].计算机测量与控制,2005,13(10):1059-1061. |
| |
| 作者姓名： | 张晓龙 吴敏 向齐良 向婕 |
| |
| 作者单位： | 中南大学,信息科学与工程学院,湖南,长沙,410083 |
| |
| 基金项目： | 国家杰出青年科学基金项目(60425310)
教育部青年教师奖项目(教人[2002]5号)。 |
| |
| 摘 要： | 烧结终点是烧结操作的主要依据，是烧结过程的关键参数；针对烧结终点参数不确定性和存在时间滞后的问题，提出了基于温度上升点处温度的预报策略，并结合专家知识，对烧结终点采取模糊控制措施，有效地抑制了烧结终点波动；应用这些技术开发的控制系统，可以准确、快速地判断和预报烧结终点的状态，起到稳定烧结终点、优化过程操作的重要作用。
|
| 关 键 词： | 烧结 烧结终点 温度上升点 模糊控制 |
| 文章编号： | 1671-4598(2005)10-1059-02 |
| 修稿时间： | 2005年4月28日 |
Fuzzy Control of Burning Through Point Based on Prediction |
| |
| Zhang Xiaolong,Wu Min,Xiang Qiliang,Xiang Jie.Fuzzy Control of Burning Through Point Based on Prediction[J].Computer Measurement & Control,2005,13(10):1059-1061. |
| |
| Authors: | Zhang Xiaolong Wu Min Xiang Qiliang Xiang Jie |
| |
| Abstract: | The burning trough point (BTP) is an important factor and a key parameter to the operation of the sintering process. In order to solve the problem of the parameter uncertainty and time delay in BTP, a new kind of prediction method is proposed based on the temperature of BTP. At the same time, a fuzzy control strategy using the expert knowledge is employed to control BTP so that the fluctuation of BTP is effectively restrained. The fuzzy control system developed on these techniques can perform the judgement, prediction and control of the BTP quickly and exactly, so as to achieve the stabilization of BTP and the optimization of the process operation. |
| |
| Keywords: | sintering burning through point burning rising point fuzzy control |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
