|
|||||
|
|
| 基于线结构光的视觉3D测量中光刀中心提取方法研究 | |
| 引用本文： | 霍龙,张爱军,刘伟军.基于线结构光的视觉3D测量中光刀中心提取方法研究[J].计算机应用与软件,2006,23(10):100-102. |
| 作者姓名： | 霍龙 张爱军 刘伟军 |
| 作者单位： | 1. 中国科学院沈阳自动化研究所先进制造技术重点实验室,辽宁,沈阳,110016;沈阳工程学院,辽宁,沈阳,110036 2. 沈阳工程学院,辽宁,沈阳,110036 3. 中国科学院沈阳自动化研究所先进制造技术重点实验室,辽宁,沈阳,110016 |
| 摘 要： | 回顾了基于计算机视觉的线结构光刀中心位置的提取方法，对各种方法进行了分析和实测，在深入研究光刀厚度及中心线分布后，提出了一种兼顾精度和计算时间的水平中值提取方法，三维重建结果表明了该方法的有效性。为基于线结构光的视觉3D测量中数据精确采集提供重要的保证。 |
| 关 键 词： | 线结构光 中心位置提取 误差比较 |
| 收稿时间： | 09 29 2004 12:00AM |
| 修稿时间： | 2004-09-29 |
RESEARCH ON THE EXTRACTION OF LASER-KNIFE CENTER BASED ON 3D VISION MEASURING DATA WITH LINE-STRUCTURED LIGHT |
|
| Huo Long,Zhang Aijun,Liu Weijun.RESEARCH ON THE EXTRACTION OF LASER-KNIFE CENTER BASED ON 3D VISION MEASURING DATA WITH LINE-STRUCTURED LIGHT[J].Computer Applications and Software,2006,23(10):100-102. | |
| Authors: | Huo Long Zhang Aijun Liu Weijun |
| Affiliation: | 1 Advanced Manufacturing Lab, Shenyang Institute of Automation Chinese Academy of Sciences, Shenyang Liaoning 110016, China; 2 Shenyang College of Engineering, Shenyang Liaoning 110036, China |
| Abstract: | Methods of the extraction of laser-knife center based on 3D vision measuring data with line-structured light are looked back, Each method is analyzed and tested. An extracted median method is obtained that consider both sides the accuracy and calculation time, The result of the precision and 3D reconstruction tests its efficiency. It ensures that the 3D vision measuring data with line-structured light can be precise collected. |
| Keywords: | Line-structured light Extraction of center position Error comparison |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ | |
