| 基于微控制内核的开放式数控系统的研究与实现 |
| |
| 引用本文： | 张李超,韩明,董炀斌,黄树槐.基于微控制内核的开放式数控系统的研究与实现[J].计算机工程与应用,2002,38(14):206-207,247. |
| |
| 作者姓名： | 张李超 韩明 董炀斌 黄树槐 |
| |
| 作者单位： | 华中科技大学材料科学与工程学院,武汉,430074 |
| |
| 基金项目： | 国家863高技术研究发展计划项目基金资助(编号:863-511-920-010) |
| |
| 摘 要： | 提出了一种运行于WindowsNT平台,基于软件实现的开放式数控系统:MAGIC,该系统基于微控制内核-可装配命令解释器体系结构,可装配命令解释器完成对单个控制部件的控制抽象,借助微控制内核提供的对象并发运行机制及同步机制,多个命令解释器可实现I/O与轴之间的精确同步关系及复杂的多轴联动控制,通过使用统一解释器指令集可实现用一致的编程接口来控制抽象硬件。该数控系统已成功地在HRP系列快速成形机上应用。
|
| 关 键 词： | 开放系统 数字控制 WindowsNT |
| 文章编号： | 1002-8331-(2002)14-0206-02 |
Design and Research on an Open NC System Based on Micro-Control Kernel |
| |
| Zhang Lichao Han Ming Dong Yangbin Huang Shuhuai.Design and Research on an Open NC System Based on Micro-Control Kernel[J].Computer Engineering and Applications,2002,38(14):206-207,247. |
| |
| Authors: | Zhang Lichao Han Ming Dong Yangbin Huang Shuhuai |
| |
| Abstract: | MAGIC is software-based open NC system under Windows NT which based on a micro-control kernel-as-sembled command-interpreters architecture that the micro-control kernel only provides the concurrent execution mecha-nism and synchronization control mechanism and command -interpreter abstracts each physical control unit.With the mechanisms provided by the kernel,several interpreters can implement complex multi-axis synchronous motion control.Each axis can be abstracted to a unified program-interface by using the same instruction set.The application of MAGIC on HRP series of rapid prototyping machine is also discussed. |
| |
| Keywords: | Open System NC Windows NT |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
