首页 | 官方网站   微博 | 高级检索  
     

中点钳位式三电平STATCOM的动态相量建模与仿真
引用本文:刘皓明,戚庆茹,李扬,倪以信.中点钳位式三电平STATCOM的动态相量建模与仿真[J].电力自动化设备,2005,25(8):18-22.
作者姓名:刘皓明  戚庆茹  李扬  倪以信
作者单位:1. 东南大学,电气工程系,江苏,南京,210096;清华港大深圳电力系统研究所,广东,深圳,518055
2. 北京国电华北电力工程有限公司,北京,100084
3. 东南大学,电气工程系,江苏,南京,210096
4. 清华港大深圳电力系统研究所,广东,深圳,518055;香港大学电机电子工程系,香港
基金项目:国家重点基础研究发展计划(973计划);国家自然科学基金
摘    要:首先介绍了中点钳位式(NPC)三电平静止同步补偿器(STATCOM)的结构和原理.采用一种改进的空间矢量脉宽调制(SVPWM)控制方法,用以解决换流器直流侧两个电容的电压均衡问题:通过开关函数详细描述了换流桥的离散动态过程,使用动态相量法得到STATCOM的动态模型.并同时给出了电源、负荷和输电线路的动态相量模型:最后使用Simulink/Matlab平台分别实现了含NPC三电平STATCOM测试系统的电磁暂态模型和动态相量模型的建模.仿真结果验证了动态相量模型的精确性和有效性.

关 键 词:中点钳位式  三电平  静止同步补偿器  空间矢量脉宽调制  动态相量
文章编号:1006-6047(2005)08-0018-05

Modeling and simulation of STATCOM system based on 3-level NPC inverter using dynamic phasors
LIU Hao-ming,QI Qing-ru,LI Yang,NI Yi-Xin.Modeling and simulation of STATCOM system based on 3-level NPC inverter using dynamic phasors[J].Electric Power Automation Equipment,2005,25(8):18-22.
Authors:LIU Hao-ming  QI Qing-ru  LI Yang  NI Yi-Xin
Abstract:The structure and principle of STATCOM(STATic synchronous COMpensator) based on a three-level NPC(Neutral Point Clamped) converter are introduced.An improved SVPWM(Space Vector PWM) control strategy is used to balance the voltages of two capacitors at converter DC side.The discrete dynamic process of converter is described through switching function.The dynamic model of STATCOM is established by using dynamic phasors method,and the dynamic models of source,load,transmission line are achieved as well.A test system with NPC three-level STATCOM is modeled with Simulink /Matlab,and the results verify its accuracy and effectiveness.
Keywords:NPC  three-level  STATCOM  SVPWM  dynamic phasors  
本文献已被 CNKI 维普 万方数据 等数据库收录!
点击此处可从《电力自动化设备》浏览原始摘要信息
点击此处可从《电力自动化设备》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司    京ICP备09084417号-23

京公网安备 11010802026262号