| 圆柱凸轮曲线的数控加工 |
| |
| 引用本文： | 赵增墀,于宗清.圆柱凸轮曲线的数控加工[J].天津工业大学学报,1989(Z1). |
| |
| 作者姓名： | 赵增墀 于宗清 |
| |
| 作者单位： | 天津纺织工学院，沈阳纺织机械厂 |
| |
| 摘 要： | 在数控铣床上配以数控分度工作台加工 VC-604-1100-3槽筒圆柱凸轮和传统方法相比不仅生产率大大提高,曲线精度的稳定性也大为提高。本文提出了根据图纸外侧曲线求解内侧曲线上若干离散点的方法,不但验证了图纸给定的内侧曲线列表值,而且光顺了这条曲线。在产实践中收到了较好的效果。
|
| 关 键 词： | 圆柱凸轮 数控机床 拐点 编程误差 光顺 插补 |
Manufacturing Cylnder Cam on a Numericall Controlled Machine Tool |
| |
| Zhoa Zhengchi Yu Zongqing.Manufacturing Cylnder Cam on a Numericall Controlled Machine Tool[J].Journal of Tianjin Polytechnic University,1989(Z1). |
| |
| Authors: | Zhoa Zhengchi Yu Zongqing |
| |
| Affiliation: | Zhoa Zhengchi Yu Zongqing |
| |
| Abstract: | In numerical control machine-tool,manufacturing VC-604-1100-3 Cyllinder cam,are accomplished with less producfive time and with more accuracy then when coventional machining.The method of to ac- hieve inside curve on the basis outside curve,not checked curve but also faired one.The method had achieved beneficial results in practi- ce. |
| |
| Keywords: | Cyllinder Cam Numerically Controlled machine tools Point of inflexion Programmed error fairing interpolation |
| 本文献已被 CNKI 等数据库收录！ |
