首页 | 官方网站   微博 | 高级检索  
     

四墙切圆煤粉炉内燃烧过程数值模拟研究
引用本文:林秀军,张强.四墙切圆煤粉炉内燃烧过程数值模拟研究[J].西安建筑科技大学学报(自然科学版),2005,37(4):463-467.
作者姓名:林秀军  张强
作者单位:西安建筑科技大学环境与市政工程学院,陕西西安710055
基金项目:国家973资助项目(G19990222-08)
摘    要:以一台四墙切圆煤粉炉试验模型为研究对象,对炉膛内煤粉的流动及燃烧进行了数值模拟.对煤粉燃烧的挥发分析出分别采用单步反应模型和两步竞争反应模型,对焦炭异相燃烧分别采用扩散燃烧模型和扩散/动力燃烧模型.将这四个模型两两组合得到的计算结果与试验测得数据进行了比较分析,最终确定挥发分析出采用两步竞争反应速率模型、焦炭异相燃烧采用扩散/动力燃烧模型较适合于描述四墙切圆煤粉燃烧室内的燃烧过程.

关 键 词:工程热物理  燃烧模型  数值模拟  四墙切圆煤粉炉
文章编号:1006-7930(2005)04-0463-05
修稿时间:2004年12月3日

Numerical simulation of pulverized-coal combustion in four-wall tangentially-fired furnace
LIN Xiu-jun,ZHANG Qiang.Numerical simulation of pulverized-coal combustion in four-wall tangentially-fired furnace[J].Journal of Xi'an University of Architecture & Technology,2005,37(4):463-467.
Authors:LIN Xiu-jun  ZHANG Qiang
Abstract:The combustion of pulverized-coal in a four-wall tangentially-fired furnace was simulated.Single kinetic rate model and two competing rate Kobayshi model are compared at the stage of volatiles combustion.Diffusion limited reaction rate model and Kinetic/Diffusion reaction rate model are also compared at the stage of char combustion.The results show that the combination of two competing rate Kobayshi model and Kinetic/Diffusion reaction rate model are suitable for calculating the combustion.
Keywords:engineering thermophysics  combustion model  numerical simulation  four-wall tangentially pulverized-coal furnace
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司    京ICP备09084417号-23

京公网安备 11010802026262号