| 形变量及退火温度对Al-Ce合金内耗影响的研究 |
| |
| 引用本文： | 初少萌,刘炜丽,曹晓辉.形变量及退火温度对Al-Ce合金内耗影响的研究[J].沈阳理工大学学报,2011(5):81-85. |
| |
| 作者姓名： | 初少萌 刘炜丽 曹晓辉 |
| |
| 作者单位： | 沈阳理工大学材料科学与工程学院; |
| |
| 摘 要： | 采用葛氏倒扭摆内耗测量仪研究了拉伸形变量及退火温度对Ce含量为0.6%的Al-Ce合金内耗的影响。结果表明:晶界内耗峰的大小与晶粒尺寸有密切关系,可作为研究二次再结晶的有效手段,形变量越大,二次再结晶开始的温度越低.
|
| 关 键 词： | 形变 Al-Ce合金 内耗 再结晶 |
The Effect of the Deformation Ratio and Annealing Temperature on the Internal Friction in Al-Ce Alloy |
| |
| CHU Shaomeng,LIU Weili,CAO Xiaohui.The Effect of the Deformation Ratio and Annealing Temperature on the Internal Friction in Al-Ce Alloy[J].Transactions of Shenyang Ligong University,2011(5):81-85. |
| |
| Authors: | CHU Shaomeng LIU Weili CAO Xiaohui |
| |
| Affiliation: | CHU Shaomeng,LIU Weili,CAO Xiaohui(Shenyang Ligong University,Shenyang 110159,China) |
| |
| Abstract: | By using the internal friction tester based on the Ke's inverted torsion pendulum,the effect of the tensile ratio and annealing treatment on the alloy internal friction in Al-0.6wt%Ce alloys is discussed.Results shows that,the grain boundary internal friction is closely related to grain fineness number.So changing internal friction can be one of the effective measures for secondary recrystallization study.In the samples with higher deformation ratio,the secondary recrystallization temperature is lower. |
| |
| Keywords: | deformation Al-Ce alloy internal friction recrystallization |
| 本文献已被 CNKI 维普 等数据库收录！ |
|
