| 铲齿成形铣刀重磨误差的分析和重磨前角的优化 |
| |
| 引用本文： | 苏桂生,钱志良,樊一骅.铲齿成形铣刀重磨误差的分析和重磨前角的优化[J].苏州大学学报(工科版),1998(5). |
| |
| 作者姓名： | 苏桂生 钱志良 樊一骅 |
| |
| 作者单位： | 苏州大学工学院机械系 |
| |
| 摘 要： | 本文先提出了γｆ＞０的铲齿成形铣刀因重磨而引起的廓形高度误差的计算方法，分析了重磨误差的规律。在此基础上又进一步提出了重磨前角的修正和优化。
|
| 关 键 词： | 铲齿成形铣刀，重磨误差，最优化 |
ANALYSIS OF THE REGROUND ERRORS OF FORMED MILLING CUTTERS AND OPTIMIZATION OF THE REGROUND SIDE RAKE |
| |
| Su Guisheng et al.ANALYSIS OF THE REGROUND ERRORS OF FORMED MILLING CUTTERS AND OPTIMIZATION OF THE REGROUND SIDE RAKE[J].Journal of Suzhou University(Engineering Science Edition),1998(5). |
| |
| Authors: | Su Guisheng |
| |
| Abstract: | If the formed milling cutter has positive side rake, the profile height errors are caused by regrinding. This paper presents a method for calculating the errors and illustrates the relationship between the actual radius of milling cutter and its reground errors. On the basis of this, an idea of revising and optimizing the reground side rake is raised. |
| |
| Keywords: | formed milling cutter reground error optimization |
| 本文献已被 CNKI 等数据库收录！ |
