飞行时间法三维成像摄像机数据处理方法研究

飞行时间法三维成像摄像机测量结果存在中心点偏移、距离歧义性和混合像素等问题,且易受曝光时间和主动光源影响.为提高测量结果的有效性和准确性,对测量数据进行了如下处理:对摄像机进行校正,减小了球面距离到三维坐标转换过程中引入的误差;采用2个不同光源调制频率交替进行测量,根据2次测量结果差值消除距离歧义性;过度曝光时测量幅值随曝光时间增大而减小,据此提出了一种基于感兴趣区域的快速自动曝光控制方法;边界混合像素以单点或单线形式出现,根据某像素邻域内各像素位置分布情况判定该像素是否为混合像素;由测量幅值判定噪声大小,根据对主动光源成像时测量幅值很大、偏移值很小的特点辨别主动光源.实验结果表明:以上方法能有效提高数据可靠性和准确性.

Data processing method of time-of-flight 3D imaging camera

Measurement results of time of flight 3D imaging camera have problems of center offset, range ambiguity and mixed pixel, and they are sensitive to exposure time and vulnerable to active light source. The measurement data were processed to improve the effectiveness and accuracy of measurement results. The camera was calibrated so that the error was decreased thanks to the transformation from spherical distances to Cartesian coordinates. The ambiguity was eliminated according to the difference between two measurements taken with two different light modulation frequencies alternately. The amplitude decreases with increasing exposure time due to excessive exposure, accordingly, a rapid auto exposure control method based on region of interest was proposed. Boundary mixed pixels are in form of a single point or a single line, accordingly, the location distribution of each pixel in its neighborhood was a used to determine whether the pixel was a mixed pixel. Noise was determined according to the amplitude, meanwhile, the active light source was identified according to the characteristics that the amplitude was very small and the offset was very big when the active light source was measured. The experimental results showed that the data reliability and accuracy were improved with the above methods. Key words: