首页 | 官方网站   微博 | 高级检索  
     

基于遗传算法的刀具路径优化排布方法
引用本文:俞武嘉,傅建中,陈子辰.基于遗传算法的刀具路径优化排布方法[J].浙江大学学报(自然科学版 ),2006,40(12):2117-2121.
作者姓名:俞武嘉  傅建中  陈子辰
作者单位:俞武嘉,傅建中,陈子辰(浙江大学 现代制造工程研究所, 浙江 杭州 310027)
基金项目:国家高技术研究发展计划(863计划)
摘    要:为缩短数控(NC)加工时间和提高加工效率,提出了一种新的基于遗传算法的刀具路径优化排布方法.该方法以加工代码分析为基础,将刀具路径分解为一系列切削路径组和对应的辅助运动路径,根据加工类型将切削路径细分为开放式切削路径和封闭式切削路径.构造了一种新的分段染色体模型,将染色体分为主节和附加节,用不同的编码方法对开放式切削路径和封闭式切削路径进行编码表示.采用改进的遗传算法,对分组后的切削刀具路径进行优化运算,得到了刀具路径排布的近似最优解.实验结果表明,该方法具有良好的优化效果,可以明显缩短辅助运动路径的总长度,减少加工时间.

关 键 词:刀具路径优化  遗传算法  数控加工
文章编号:1008-973X(2006)12-2117-05
收稿时间:2005-10-17
修稿时间:2005年10月17

Approach optimizing tool paths arrangement based on genetic algorithm
YU Wu-jia,FU Jian-zhong,CHEN Zi-chen.Approach optimizing tool paths arrangement based on genetic algorithm[J].Journal of Zhejiang University(Engineering Science),2006,40(12):2117-2121.
Authors:YU Wu-jia  FU Jian-zhong  CHEN Zi-chen
Affiliation:Institute of Modern Manufacturing Engineering, Zhejiang University, Hangzhou 310027, China
Abstract:To reduce the process time and improve the efficiency of numerical control(NC) machining,a new approach of tool paths arrange optimization for NC machining based on genetic algorithm was presented.Basing on the analysis of NC program,the tool paths were classified as a series of cutting paths and corresponding auxiliary movement paths in the approach,and the cutting paths were sorted into open cutting paths and close cutting paths by different machining types.A new sectional chromosome model containing a body section and a tail section was constructed,and the coding forms of open and close tool paths were described by different coding methods.Improved genetic algorithm was used for optimal computation of cutting paths,and an approximate optimal solution was achieved for tool paths arrangement.The experimental results show that the approach is effective for tool paths arrangement problem.The approach can shorten the total length of auxiliary movement paths and reduce the process time of machining.
Keywords:tool paths optimization  genetic algorithm  NC machining
本文献已被 CNKI 维普 万方数据 等数据库收录!
点击此处可从《浙江大学学报(自然科学版 )》浏览原始摘要信息
点击此处可从《浙江大学学报(自然科学版 )》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司    京ICP备09084417号-23

京公网安备 11010802026262号