首页 | 官方网站   微博 | 高级检索  
     

钛酸锶钡压电陶瓷超细粉体的水热法合成
引用本文:苗鸿雁,周耀辉,朱刚强.钛酸锶钡压电陶瓷超细粉体的水热法合成[J].无机盐工业,2005,37(5):15-17.
作者姓名:苗鸿雁  周耀辉  朱刚强
作者单位:陕西科技大学材料科学与工程学院,陕西,咸阳,712081
基金项目:国家自然科学基金资助项目(项目批准号: 50372039)
摘    要:采用水热工艺制备不同组成的BaxSr1-xTiO3(BST),利用FT-IR,XRD,TEM等技术分析了水热反应转变机理及相结构转变情况,同时对影响合成的工艺参数以及不同组成材料的居里温度变化进行了研究。结果表明:获得的BST粉体颗粒粒度较细,粒径为20~40nm。其最佳的工艺参数为n(Ba)/n(Ti)=3,n(Sr)/n(Ti)=1/4或者n(Ba)/n(Ti)=1/3,n(Sr)/n(Ti)=4/5,cKOH=1.5~2mol/L。制得不同组成粉体的居里温度呈规律性变化。

关 键 词:钛酸锶钡  红外探测  钛酸锶  钛酸钡
文章编号:1006-4990(2005)05-0015-03
修稿时间:2005年2月15日

Preparation of barium strontium titanate nano -powders by hydrothermal method
Miao Hongyan,Zhou Yaohui,Zhu Gangqiang.Preparation of barium strontium titanate nano -powders by hydrothermal method[J].Inorganic Chemicals Industry,2005,37(5):15-17.
Authors:Miao Hongyan  Zhou Yaohui  Zhu Gangqiang
Abstract:The products of Ba_xSr_(1-x)TiO_3(BST) with different composition are prepared by hydrothermal method and the mechanism of hydrothermal reaction and the transformation of phase structure of the precursor are analyzed by FT-IR,XRD and TEM.The process parameters of influencing synthesis and the Curie temperature changes with different composition of BST are studied.The results show that the BST powders obtained have a fine granulity,the grain size ranges from 20 to (40 nm),the optimum process parameter is n(Ba)/n(Ti)=3,n(Sr)/n(Ti)=1/4 or( n(Ba)/n(Ti)=)1/3,n(Sr)/n(Ti)=4/5,c_(KOH)=1.5~2 mol/L,the Curie temperature takes on regular movement with different constitution of BST.
Keywords:barium strontium titanate  infrared acquisition  strontium titanate  barium titanate
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司    京ICP备09084417号-23

京公网安备 11010802026262号