| 新型陶瓷刀具的应用研究 |
| |
| 引用本文： | 张树生,李兆前.新型陶瓷刀具的应用研究[J].陶瓷学报,1998,19(2):79-81. |
| |
| 作者姓名： | 张树生 李兆前 |
| |
| 作者单位： | 山东工业大学!济南，250061，山东工业大学 |
| |
| 摘 要： | 本文详细研究了新型陶瓷刀具APW（Al2O3／SiCw／SiCp）系列的切削性能．研究结果表明：在加工不锈钢时，APW3的抗磨损能力好于APW1，而JX—1最差；在高速湿切削高温镍基会金Inconel718（GH169）时，APW1的抗磨损能力好于JX－1，而硬质合金刀具YG8（K30）最差；高速切削时必须使用切削液，由于切削温度对工件材料加工硬化和高温镍基合金Inconel718强度屈服拐点的影响而存在一个最佳的切削速度范围。
|
| 关 键 词： | 陶瓷刀具 切削性能 镍基合金 |
APPLICATION STUDY ON ADVANCED CERAMIC TOOL |
| |
| Zhang Shusheng, Li Zhaoqian.APPLICATION STUDY ON ADVANCED CERAMIC TOOL[J].Journal of Ceramics,1998,19(2):79-81. |
| |
| Authors: | Zhang Shusheng Li Zhaoqian |
| |
| Affiliation: | Shandong University of Technology |
| |
| Abstract: | The cutting performance of APW series (Al2O3/SiCw/SiCp) ceramic tools has been researched in detail. The wear resistance ability is APW3 >APW1 >JX - 1 when machining stainless steel. The cutting performance of APW1 is superior to that of JX - 1 and YG8 (K30) when wet cutting Inconel 718(GH169) at high speed. Coolant must be used when cutting at high speed. There is an optimum speed range because of the effect of high cutting temperature on the strength yield point of the workpiece. |
| |
| Keywords: | ceramic tool cutting performance nickel-based alloy |
| 本文献已被 CNKI 维普 等数据库收录！ |
