首页 | 官方网站   微博 | 高级检索  
     

用Sol—Gel法制备氧化铝多孔陶瓷的研究
引用本文:薛明俊,孙承绪.用Sol—Gel法制备氧化铝多孔陶瓷的研究[J].中国陶瓷,1999,35(3):5-8.
作者姓名:薛明俊  孙承绪
作者单位:华东理工大学
摘    要:主要研究了羟铝比([OH-]/[Al3+])、铝离子浓度及成孔剂含量和温度对sol-gel法制备的氧化铝多孔陶瓷气孔率、气孔分布和显微结构的影响。实验结果表明:铝溶胶的最佳组成是羟铝比为2.38,铝离子浓度为10wt%,成孔剂含量为5wt%。随着烧成温度由1420℃升至1500℃时,8#试样的显微结构由松散的片状向连通贯穿的整体结构转变。在1450℃时,2#试样([OH]/[Al3+]=2.33)主要是单个颗粒连接的结构;8#试样([OH]/[Al3+]=2.40)主要是相互贯穿连成一体的结构。前者气孔率小于后者,其气孔分布范围较后者更窄

关 键 词:多孔陶瓷  氧化铝陶瓷  溶胶-凝胶法

STUDY ON POROUS ALUMINA CERAMICS PREPARED BY Sol-Gel
Xue MingjunSun ChengxuLi Yan.STUDY ON POROUS ALUMINA CERAMICS PREPARED BY Sol-Gel[J].China Ceramics,1999,35(3):5-8.
Authors:Xue MingjunSun ChengxuLi Yan
Abstract:The influence of the ratio( / ), ,content of pore-forming material and calcinating temperature on the properties such as appearant porosity,PSD and microstructures of porous alumina ceramics was briefly studied.The experiments show that the optimal condition of alumina sol is /Al]=2.38, =10wt% and five percent by weight of pore-forming material for appearant porosity and bulk density.The microstructure of sample 8# is converted from loose and seperated pellets to crossing-linked structure with the increment of temperature.The microstructure of sample 2# is briefly comprised by aggregated particles,that of sample 8# by crossing-linked network.The former is lower and narrower than the latter in appearant porosity and PSD at 1450,respectively.
Keywords:porous ceramics  alumina ceramics  sol-gel  
本文献已被 CNKI 维普 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司    京ICP备09084417号-23

京公网安备 11010802026262号