| 定向排布层状SiC晶须补强Al2O3复相陶瓷的制备及其性能 |
| |
| 引用本文： | 曾宇平,江东亮,谭寿洪,郭景坤.定向排布层状SiC晶须补强Al2O3复相陶瓷的制备及其性能[J].硅酸盐学报,1998,26(5):558-564. |
| |
| 作者姓名： | 曾宇平 江东亮 谭寿洪 郭景坤 |
| |
| 作者单位： | 中国科学院上海硅酸盐研究所高性能陶瓷和超微结构国家重点实验室 |
| |
| 摘 要： | 利用流延成型和热压烧结工艺制得了晶须高度定向排列的层状Ａｌ２Ｏ３基复相陶瓷。讨论了分散剂、ｐＨ值等对浆料粘度的影响。分析了流延成型过程中刀片的运动速度和剪切强度对晶须定的影响。测定了不同取向角下材料的强度和韧性，结果表明：材料和力学性能强烈依赖取向角，随取向角增大，强度和韧性逐渐降低。
|
| 关 键 词： | 成型 碳化硅晶须 氧化铝 复合陶瓷 补强 烧结 |
FABRICATION AND PROPERTIES OF UNIDIRECTIONALLY SiC WHISKERS-REINFORCED MULTILAYERS Al2O3 MATRIX COMPOSITES |
| |
| Zeng Yuping,Jiang Dongliang,Tan Shouhong,Guo Jingkun.FABRICATION AND PROPERTIES OF UNIDIRECTIONALLY SiC WHISKERS-REINFORCED MULTILAYERS Al2O3 MATRIX COMPOSITES[J].Journal of The Chinese Ceramic Society,1998,26(5):558-564. |
| |
| Authors: | Zeng Yuping Jiang Dongliang Tan Shouhong Guo Jingkun |
| |
| Abstract: | The unidirectionally whiskers_reinforced multilayer Al 2O 3 matrix composites were prepared by tape casting and hot pressing. Effects of the pH value of slurry and dispersant concentration upon viscosity are disscussed. During tape casting, the motion rate of the blade and the shear stresses that effected the whisker orientation were analysed. Bending strength and fracture toughness of composites were also measured and the results show that the mechanical properties strongly depend on the oriented angle of whiskers, bending strength , and fracture toughness decreases with the increase of the oriented angle. |
| |
| Keywords: | tape casting slurry viscosity oriented angle silicon carbide whisker-alumina composites |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
