| 汽车换挡面板高壁厚塑料导光条成型收缩研究 |
| |
| 引用本文： | 雷绍阔,张健,钟国留,刘伟,赵勇,朱治文.汽车换挡面板高壁厚塑料导光条成型收缩研究[J].塑料科技,2019(7):89-93. |
| |
| 作者姓名： | 雷绍阔 张健 钟国留 刘伟 赵勇 朱治文 |
| |
| 作者单位： | 广州汽车集团股份有限公司汽车工程研究院;华南理工大学聚合物新型成型装备国家工程研究中心 |
| |
| 摘 要： | 基于模流分析研究了高壁厚汽车塑料导光条的成型收缩性能,并通过正交试验考察了浇口厚度、熔体温度、模具温度、注射时间和保压压力5个因素对产品收缩性能的影响。结果表明:保压压力对产品收缩性能的影响最为显著,而浇口厚度和注射时间对产品收缩性能的影响相对较小。
|
| 关 键 词： | 模流分析 高壁厚透明导光条 正交试验 收缩性能 |
Study on Molding Shrinkage Performance of Automobile Plastic Light Guide Bar with High Wall Thickness in Shift Panel |
| |
| Lei Shaokuo,Zhang Jian,Zhong Guoliu,Liu Wei,Zhao Yong,Zhu Zhiwen.Study on Molding Shrinkage Performance of Automobile Plastic Light Guide Bar with High Wall Thickness in Shift Panel[J].Plastics Science and Technology,2019(7):89-93. |
| |
| Authors: | Lei Shaokuo Zhang Jian Zhong Guoliu Liu Wei Zhao Yong Zhu Zhiwen |
| |
| Affiliation: | (Automotive Engineering Institute, Guangzhou Automobile Group Co., Ltd., Guangzhou 511434, China;National Engineering Research Center of Novel Equipment for Polymer Processing, South China University of Technology, Guangzhou 510641, China) |
| |
| Abstract: | Lei Shaokuo;Zhang Jian;Zhong Guoliu;Liu Wei;Zhao Yong;Zhu Zhiwen(Automotive Engineering Institute, Guangzhou Automobile Group Co., Ltd., Guangzhou 511434, China;National Engineering Research Center of Novel Equipment for Polymer Processing, South China University of Technology, Guangzhou 510641, China) |
| |
| Keywords: | Injection molding simulation Transparent light guide bar with high wall thickness Orthogonal experiment Shrinkage performance |
| 本文献已被 CNKI 维普 等数据库收录！ |
|
