| 塑料注塑模具CAD设计软件对比 |
| |
| 引用本文： | 蒋易立,文劲松.塑料注塑模具CAD设计软件对比[J].塑料科技,2010,38(2). |
| |
| 作者姓名： | 蒋易立 文劲松 |
| |
| 作者单位： | 华南理工大学聚合物新型成型装备国家工程研究中心,广东,广州,510640 |
| |
| 摘 要： | 介绍了Solidworks与Pro/E在注塑模设计中的使用流程和主要功能。通过实例比较了二者在模具设计过程中的优缺点,并且提出了改进软件的方向。对实际工作中的模具设计人员和二次开发人员有一定的参考作用。
|
| 关 键 词： | 注塑模 Solidworks Pro/E 分模工具 二次开发 |
Comparison of CAD Softwares for Plastic Injection Mould |
| |
| Jiang Yili,Wen Jinsong.Comparison of CAD Softwares for Plastic Injection Mould[J].Plastics Science and Technology,2010,38(2). |
| |
| Authors: | Jiang Yili Wen Jinsong |
| |
| Affiliation: | Jiang Yili,Wen Jinsong-National Engineering Research Center of Novel Equipment for Polymer Processing,South China University of Technology,Guangzhou 510640,China |
| |
| Abstract: | The application methods and main functions of Solidworks and Pro/E softwares were introduced.The characteristics of the two softwares during mould design were compared through the examples.The improvement direction of the softwares was presented,which would be helpful for mould design engineers and secondary development engineers. |
| |
| Keywords: | Injection mould Solidworks Pro/E Mould parting tool Secondary development |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
