首页 | 官方网站   微博 | 高级检索  
     

钛酸酯偶联剂改性Sb_2O_3及其性能研究
引用本文:尹作栋,苏孟,童张法,张涛,陈笑.钛酸酯偶联剂改性Sb_2O_3及其性能研究[J].塑料科技,2012,40(5):96-99.
作者姓名:尹作栋  苏孟  童张法  张涛  陈笑
作者单位:广西大学化学化工学院,广西南宁,530004
基金项目:广西理丁科学实验中心重点项目
摘    要:采用钛酸酯偶联剂NDZ-101对氧化锑粉体进行表面改性。研究了NDZ-101用量、反应温度、反应时间对Sb2O3表面改性效果的影响。用FTIR、SEM等对改性Sb2O3进行表征。结果表明:最佳改性条件为NDZ-101用量3%,温度70℃,反应时间40 min。NDZ-101以化学接枝的方式包覆于氧化锑表面。其改性的Sb2O3粉体能均匀分散在聚丙烯(PP)中,有效降低了对PP基材力学性能的影响。

关 键 词:表面改性  钛酸酯偶联剂  氧化锑  聚丙烯  力学性能

Study on Modification of Sb2O3 with Titanate Coupling Agent and Its Performance
Yin Zuodong , Su Meng , Tong Zhangfa , Zhang Tao , Chen Xiao.Study on Modification of Sb2O3 with Titanate Coupling Agent and Its Performance[J].Plastics Science and Technology,2012,40(5):96-99.
Authors:Yin Zuodong  Su Meng  Tong Zhangfa  Zhang Tao  Chen Xiao
Affiliation:Department of Chemistry and Chemical Engineering,Guangxi University,Nanning 530004,China
Abstract:The Sb2O3 powder surface was organically modified with titanate coupling agent(NDZ-101).The effects of content of NDZ-101,reaction temperature and reaction time on the surface modification of Sb2O3 were researched.The modified Sb2O3 was characterized by means of FT-IR and SEM.The results show that the optimum conditions are as follows: the content of NDZ-101 is 3%,the temperature is 70℃ and the reaction time is 40 min.The surface of Sb2O3 is covered with NDZ-101 by the way of chemical grafting,and then the modified Sb2O3 powder evenly disperses into PP so as to effectively reduce the influence on the mechanical properties of PP.
Keywords:Surface modification  Titanate coupling agent  Sb2O3  Polypropylene  Mechanical properties
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司    京ICP备09084417号-23

京公网安备 11010802026262号