| 提高16Mn连铸坯控轧合格率 |
| |
| 引用本文： | 张国滨,李文惠.提高16Mn连铸坯控轧合格率[J].钢铁研究,1994(3):7-11,61. |
| |
| 作者姓名： | 张国滨 李文惠 |
| |
| 作者单位： | 唐山工程技术学院，邯郸钢铁总厂 |
| |
| 摘 要： | １６Ｍｎ连涛坯进行控轧时，按铸坯碳当量的上限和下限，分别采用两种不同的控轧制度。在邯钢中板分厂试轧的结果，轧材合格率均达到９６％以上，投产后轧材合格率达到９８％以上。
|
| 关 键 词： | 16Mn钢 连铸坯 控轧 碳当量 合格率 |
IMPROVEMENT IN RATIO OF QUALIFIED PRODUCTS IN CONTROLLED ROLLING OF 16Mn CONCASTING SLAB |
| |
| Zhang Guobin,Wang Zhenzeng.IMPROVEMENT IN RATIO OF QUALIFIED PRODUCTS IN CONTROLLED ROLLING OF 16Mn CONCASTING SLAB[J].Research on Iron and Steel,1994(3):7-11,61. |
| |
| Authors: | Zhang Guobin Wang Zhenzeng |
| |
| Affiliation: | Zhang Guobin;Wang Zhenzeng(Tangshan Engineering Technological College)LiWenhui;Li Ni;Chen Junzhi(Handan General Iron&Steel Works) |
| |
| Abstract: | In controlled rolling of 16Mn concasting slabs two different patterns of control rolling have been practised ln compliance with the upper and lower limits of the carbon equivalence in the slab.Experimental results at the Plate Mill of Handan Iron&Steel Works demonstrate that rolled products up to the standard take up over 96% and ratio of the qualified products exceeds 98% of the total. |
| |
| Keywords: | control rolling 16Mn carbon equivalence phase transformation |
| 本文献已被 CNKI 维普 等数据库收录！ |
