| 基于ANSYS有限元法的型钢轧机机架分析 |
| |
| 引用本文： | 吴旭春,李佑河,黄贞益,范金城,李长宏,陈敏侠.基于ANSYS有限元法的型钢轧机机架分析[J].冶金设备,2010(5):25-27,5. |
| |
| 作者姓名： | 吴旭春 李佑河 黄贞益 范金城 李长宏 陈敏侠 |
| |
| 作者单位： | [1]南京钢铁公司中型厂,江苏南京210035 [2]安徽工业大学材料科学与工程学院,安徽马鞍山243002 |
| |
| 摘 要： | 利用ANSYS有限元法对南京钢铁公司中型厂850轧机机架的变形及分布进行分析,结果表明,最大应力出现在压下螺母孔圆角处,并用实测值对模拟计算结果进行修正,得到轧机的力学性能理论结果,为现场工艺的制定和设备的维护和使用提供了理论依据。
|
| 关 键 词： | ANSYS有限元法 轧机机架 力学性能 |
Analysis of the Type Steel Mill Stand Based on ANSYS Finite Element Method |
| |
| Wu Xuchun,Li Youhe,Huang Zhenyi,Fan Jincheng,Li Changhong,Chen Minxia.Analysis of the Type Steel Mill Stand Based on ANSYS Finite Element Method[J].Metallurgical Equipment,2010(5):25-27,5. |
| |
| Authors: | Wu Xuchun Li Youhe Huang Zhenyi Fan Jincheng Li Changhong Chen Minxia |
| |
| Affiliation: | Wu Xuchun Li Youhe Huang Zhenyi Fan Jincheng Li Changhong Chen Minxia(1：Mid-Type Steel Plant of Nanjing Iron and Steel Co.,Ltd.,Jiangsu Nanjing 210035;2：School of Materials Science and Engineering of Anhui University of Technology,Anhui Maanshan 243002) |
| |
| Abstract: | The deformation and stress distribution of the 850 mill stands in Nanjing Irond and Steel Co.,Ltd.are analyzed by ANSYS FEM,the results stating：the maximum stress appears at the rounding of screw box hole.The results of the finite element simulation are corrected with the measured value,the mechanical properties of theoretical results of the mill stand are given,all of this supply the theoretical basis for process development and equipment maintenance and use on-site. |
| |
| Keywords: | ANSYS finite element method Rolling mill stand Mechanical property |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
