首页 | 官方网站   微博 | 高级检索  
     

等温时效对节约型双相不锈钢2101析出行为的影响
引用本文:方轶琉,刘振宇,王国栋.等温时效对节约型双相不锈钢2101析出行为的影响[J].钢铁研究学报,2010,22(6):21-21.
作者姓名:方轶琉  刘振宇  王国栋
作者单位:东北大学轧制技术及连轧自动化国家重点试验室,辽宁,沈阳,110004
基金项目:国家自然科学基金资助项目,国家"973"计划资助项目
摘    要:研究了700~850℃等温时效对节约型双相不锈钢LDX 2101析出行为的影响。研究结果表明经等温时效处理,颗粒状析出物主要在奥氏体和铁素体相界处形核长大,从而恶化材料的冲击韧性。700℃是影响该材料冲击韧性最敏感脆化温度。在700℃等温时效处理120 min后,冲击韧性值降低到33 J,仅为固溶处理后冲击韧性值的31%。经过TEM观察分析,颗粒状析出物主要是Cr2N型氮化物以及少量Cr23C6型碳化物。

关 键 词:等温时效  节约型双相不锈钢  析出行为  冲击韧性
收稿时间:2009-06-22;

Effect of Isothermal Aging on Precipitation Behavior of Lean Duplex Stainless Steel 2101
FANG Yi-liu,LIU Zhen-yu,Wang Guo-dong.Effect of Isothermal Aging on Precipitation Behavior of Lean Duplex Stainless Steel 2101[J].Journal of Iron and Steel Research,2010,22(6):21-21.
Authors:FANG Yi-liu  LIU Zhen-yu  Wang Guo-dong
Abstract:In this work, influence of isothermal aging treatments on precipitation behavior and impact energy of LDX 2101 had been studied. It was worked out that particle precipitates nucleated and grew at δ/γ interface which deteriorated impact energy during isothermal aging treatments. 700°C is the most sensitive embitterment temperature. After aged at 700°C for 30 min, the impact energy decreased to 33J, which was only 31% of the as-annealed sample. Based on TEM analysis, the mainly particle precipitates were mainly Cr2N-type nitrides and a little of Cr23C6-type carbides.
Keywords:Isothermal aging treatments  LDX 2101  impact energy  nitride  
本文献已被 CNKI 万方数据 等数据库收录!
点击此处可从《钢铁研究学报》浏览原始摘要信息
点击此处可从《钢铁研究学报》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司    京ICP备09084417号-23

京公网安备 11010802026262号