| 鞍钢东烧厂600 mm料层厚度赤精矿烧结工艺参数研究 |
| |
| 引用本文： | 何海熙,吴铿,王长秋,侯恩俭,尹晓莹,李康.鞍钢东烧厂600 mm料层厚度赤精矿烧结工艺参数研究[J].中国冶金,2009,19(12):19-19. |
| |
| 作者姓名： | 何海熙 吴铿 王长秋 侯恩俭 尹晓莹 李康 |
| |
| 作者单位： | 北京科技大学 北京科技大学冶金与生态工程学院 北京科技大学冶金与生态工程学院 |
| |
| 摘 要： | 为了将鞍钢集团矿业公司东烧厂现有的500 mm烧结料层提高到600 mm，对东烧厂赤浮精矿的烧结特点进行分析，以赤浮精矿为主要原料进行实验室600 mm厚料层烧结杯试验，研究出获得化学成分稳定、机械强度高、粒度均匀、高温冶金性能优良的烧结矿的最佳工艺参数。为鞍钢东烧厂进一步提高料层厚度提供了理论依据。
|
| 关 键 词： | 赤浮精矿 厚料层 烧结杯试验 工艺参数 |
Study on Sintering Parameters of Hematite with 600 mm Deep bed at East Anshan Sintering Plant |
| |
| Hai-Xi HE.Study on Sintering Parameters of Hematite with 600 mm Deep bed at East Anshan Sintering Plant[J].China Metallurgy,2009,19(12):19-19. |
| |
| Authors: | Hai-Xi HE |
| |
| Abstract: | In order to improve the sintering bed height from 500 mm to 600 mm at East Anshan Sintering Plant of AISC, characteristics of hematite concentrate had been investigated. With the hematite concentrate as the main raw material, 600 mm deep bed sintering test had been carried out under the laboratory conditions to obtain the optimum parameters. With the optimum parameters sinter of high chemical composition stability，mechanical strength, uniform size distribution, high temperature metallurgical qualities had been obtained. The test had provided theoretical basis for East Anshan Sintering Plant of AISC to further enhance the sintering bed height. |
| |
| Keywords: | hematite concentrate deep bed sinter pot test parameter |
|
| 点击此处可从《中国冶金》浏览原始摘要信息 |
|
点击此处可从《中国冶金》下载全文 |
